66CS03H Service Mode (Modo de Serviço)

Modelo:66CS03H








Marca
Mod.
Ch.
Tipo
Modo
Proced.
File
Sharp
CTV
Service Mode
1. Connect a test pattern to the antenna terminal 2. Tune to this signal 3. Turn the receiver off using the mains button 4. Press the volume down and channel up buttons on the front of the receiver at the same time 5. Keeping these buttons pressed, turn the mains on 6. When the set starts up it will be in service mode 7. Release the two buttons Use the channel up and down buttons to move between the options Use the volume control buttons to change the data Use the standby button on the remote control to store the data Turn the set off at the mains to exit the service mode.
Sharp
CTV
Service Mode
1. Connect a test pattern to the antenna terminal 2. Tune to this signal 3. Turn the receiver off using the mains button 4. Press the volume down and channel up buttons on the front of the receiver at the same time 5. Keeping these buttons pressed, turn the mains on 6. When the set starts up it will be in service mode 7. Release the two buttons Use the channel up and down buttons to move between the options Use the volume control buttons to change the data Use the standby button on the remote control to store the data

Universal LED TV Service Mode

Most universal led tv boards check:

  • Menu → 1147
  • Menu → 2580
  • Source → 2580

All LED TV Service Codes

  • Menu → 1147
  • Menu → 1185
  • Menu → 1183
  • Menu → 2580
  • Menu → 1187
  • Menu → 7050
  • Menu → 8202
  • Menu → 7343
  • Menu → 2008
  • Menu → 1999
  • Menu → 0000
  • Menu → 1167
  • Menu → 1199
  • Menu → 1234
  • Menu → 2387
  • Menu → 8893
  • Menu → 2383
  • Menu → 4725
  • Source → 3138
  • Source → 2580
  • Source → 2585
  • Source → 7342
  • Source → 2583
  • Source → 2283
  • Source → 2285
  • Source → 3195
  • Source → 3137
  • Source → 0000