Service Mode (Modo de Serviço)

Insira Marca, Modelo ou Chassis.



Marca
Mod.
Ch.
Tipo
Modo
Proced.
File
FUNAI
TV
Service Mode
Turn Power ON.
Press in remote SOURCE, 2, 5, 8, 0
SHARP
TV
Service Mode
To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit and on the remote control for more than the standard time in the appropriate condition.
EMERSON
TV
Service Mode
Use the service remote control unit.
Turn the power on. (Use main power on the TV unit.)
Press " SLEEP " button on the service remote control unit. Version of microcomputer will display on the CRT. (Ex: 5Y10-1.34)
Check the display on the lower left is "4A" and if it is not "4A", set it at "4A" according to "3-1 FRENCH,STEREO TYPE, ACCESS CODE, VIDEO TONE,SB SOUND" and "COMB FILTER".
AOC
TV
Service Mode
Press keys 100 -> 9 -> 9 -> 1 to enter Engineer Mode.
Press Menu key repeat to ADC page, then select EPrint and press Right key to initialize EEPROM.
Press number key 100 -> 9 -> 9 -> 9 to enter Factory Mode.
SAMSUNG
TV
Service Mode
Remote Press: POWER OFF, MUTE, 182, POWER ON
NOBLEX
TV
Service Mode
1.Turn On TV.
2.Press Menu.
3.Select Sound -> Balance.
4.Whem Balance = "0"; press 0->5->3->2.
5.if not work press 1->9->6->9.
HISENSE
TV
Service Mode
1.Turn On TV.
2.Press Menu.
3.Select Sound -> Balance.
4.Whem Balance = "0"; press 0->5->3->2.
5.if not work press 1->9->6->9.
TELEFUNKEN
TV
Service Mode
First press "MENU" then press the remote control code two times, which is 4725
GENERIC
TV
Service Mode
Dessoldar a Resistencia 3608 que tem inscrição SERVICE junto ao microprocessador, ligar o tv e pressionar a tecla i
CCE
TV
RESET
1-Ligar o aparelho na rede elétrica;
2-Pressionar no controlo remoto a tecla "SOURCE";
3-Digitar a senha de acesso "2580";
4-Selecionar a opção "SPECIAL SET"->"OK";
5-Selecionar a opção "RESTABELECER PREDEFINIÇÕES";
6-O aparelho desligar-se-á automaticamente;
7-Desligue o TV da rede elétrica, espere 10 segundos e volte a ligar.