Dicas Reparação





Pesquisa: WMSXF30

Resultados 8

MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyWMSXF30WALKMAN MOTOR These two pieces had their motors replaced on a first repair.These motors then failed before the 90 day warranty period. -HQ COMMENTS: These motors have been recently improved by Tokyo. Howeverthey will be reevaluated and rechecked. Thanks for the info.
SonyWMSXF30BOTH SIDES PLAY AT SAME TIME - REMOVE SOLDER BRIDGE ON IC301 Solder bridge on IC301.
SonyWMSXF30NO TUNING INDICATOR - TUNER CABLE AND POINTER OUT OF SLOT No tuning indicator, put back in place then lock tight cablecasing in place.
SonyWMSXF30MOTOR PULLEY INSTALLED UPSIDE DOWN The replacement motor part X33367441 has the pulley installedupside down causing slippage of belt from motor.
SonyWMSXF30KNOBS DON'T FIT - REFER TO AUDIO PRODUCTS S/B 309 REPLACEMENT KNOBS OUT OF KC DO NOT FIT. THE SHAFT IS TOOWIDE AND WON'T FIT IN THE HOLE. -HQ COMMENTS: Please refer to Audio products service Bulletin No. 309.
SonyWMSXF30NEW TUNING ANDVOLUME KNOBS DON'T FIT - REFER TO S/B 309 The posts on the new black knobs are made too large to fitthe appropriate joints.
SonyWMSXF30OUTER ASSY AND WIRE TWO SHORT FOR PROPER TUNING OPERATION Outer assembly and wire, ref 26 and 27, part numbersX-3363-148-1 and 3-369-122-01 are too short for alignment of tunerindicatior numbers on front lid of unit. Is there a possibility that oldnumbers (parts) WMAF-59 are being substituted for model number W
SonyWMSXF30DEFECTIVE MOTORS Many reports of bad motors. Problems include binding,excessive wow and flutter and irregular speed. -HQ COMMENTS: The defective motors have been investigated and found tobe bad. Tokyo fax (GF302921): The motor has been improved to preventsilicon gas fr



Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads