Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | BE3D KV25X1U | E/W faulty | Q800 in pin cush out cct leaky | ||
Sony | BE-3D KV25F3U | no audio output | no +21V, PS602 2.7A o/c (153268621) | ||
Sony | BE-3D KV25F3U | dead, no 135V | o/c print around D609 | ||
Sony | BE-3B KV25T1U | dead, no start up | R600 39k 5W in PSU (1-216-490-11) | ||
Sony | BE3B KV25T1U | No pic, sound & EHT OK | R824 1k8 burnt & C815 dry joints | ||
Sharp | SV2589 | Red tint at top of pic & slight vert jitter | C636 330µ dy joints | ||
Sharp | SV2589 | INT RED TINT IN TOP 2/3rds OF PICTURE | C636 DRY CHECK DIODES ON HEATSINK ALSO | ||
Sharp | SV2589 | For PSU problems. | Resolder diodes attached to PSU heatsink. | ||
Sharp | SV2588H | Dead aft brief activity at sw on | Overiding relay gave blank raster/no sound - D712 & D713 dry joints | ||
Mitsubishi | CTV2533 | Destruction of line TR ( 2SD1877 ) int | Remove T551 retin & replace replace STR59041 Q901 | ||
JVC | AV28S1EK AV25S1EK MX2 | Width & E-W faulty | Replaced memory chip for electronic screwdriver - 24C01A/P IC1707 | ||
JVC | AV28S1EK AV25S1EK MX2 | St/by light changes col but no line drive | No supply to line dr tfmr as R903 2k2 hi res (switches st/by tr Q902) | ||
JVC | AV25VM1EK | St/by only & no line drive | TDA8366 jungle chip IC101 pin 35 8v supply missing as IC951 8v reg faulty KIA7808PI | ||
JVC | AV25VM1EK | Field to & bottom cramp | IC401 Field/EW chip TDA8350Q | ||
JVC | AV25VM1 JA | Blank raster with fb lines & top cramping | FOP IC TDA8350 |