Dicas Reparação
Modelo - Chassis V22
Pesquisa: V22 Enviar Dica Resolvida
Resultados 73
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | STRAV220 | NO DISPLAY OR OUTPUT | No display or output although click of relay can be heard whenunit is switched on. | ||
| Sony | CCDV220 | UNIT SHUTSDOWN | If any function was attempted such as Play, FF or Rewind drumwould start up, come up to speed, then the unit would shutdown. Modeswitch checked out ok. The symptom seemed to lead to no RFS at themicro but when checked was there. One strange check deter | ||
| Sony | CCDV220 | DISTORTED AUDIO: PCM ONLY (AFM PB OK) | Garbled PCM audio. Mono AFM ok. | ||
| Sony | CCDV220 | VIDEO EDIT | There seems to be some confusion with our dealers on whetherthis unit does a video insert without erasing the PCM track. -HQ COMMENTS: No, an audio dub may be done after recording video, but avideo dub is not possible. | ||
| Sony | CCDV220 | PICTURE TEARING | Customer complains that when the low battery light comes onthe picture starts tearing at the bottom. Should the customer try to usethe VCR after the low battery indicator comes on? -HQ COMMENTS: Sounds like the machine may need a battery down adjust-me | ||
| Sony | CCDV220 | NOISY PICTURE | Worse in recordings - looks like worn heads. | ||
| Sony | CCDV220 | DROPOUT IN PLAYBACK | Dropout in playback. | ||
| Sony | CCDV220 | EXCESSIVE DROPOUTS | Unit is experiencing excessive dropouts. | ||
| Sony | CCDV220 | INTERMITTENT VIDEO DROPOUT | Intermittent dropout in playback picture. | ||
| Sony | CCDV220 | NOISY PLAYBACK | Playback video was noisy. | ||
| Sony | CCDV220 | TAPE STUCK IN UNIT | The tape was stuck in the unit with the threading ring about1/4 of the way around. | ||
| Sony | CCDV220 | PICTURE-IN VIEWFINDER ROLLS | In camera mode the picture rolls in the viewfinder. Also, 4-5colored vertical bars appear on monitor and pause does not function. | ||
| Sony | CCDV220 | UNIT WORKS WITH A/C ADAPTOR BUT NOT BATTERY | Camera would function fine with 5V regulator but not withbattery. With battery there was no initialization. No VTR/ON pulse orsystem reset pulse. |