Dicas Reparação
Modelo - Chassis TX807
Pesquisa: TX807 Enviar Dica Resolvida
Resultados 51
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Ferguson | TX807 | No sound | EEPROM possible fault - obtain from CHS | ||
| Ferguson | TX807 | No signals/tuning | RL51 1R8 o/c in 6v supply from lopt | ||
| Ferguson | TX807 | No CRT heaters | grey lead from main pcb to tube base dry jointed | ||
| Ferguson | TX807 | Low sound (Stuck in Hotel Mode) | 1 Turn set to standby using remote. 2 Turn off with set's AC switch & wait till the red standby light has faded away to nothing. 3 While holding the magenta Text button on TV turn on AC switch. 4 A service menu should now be on screen. Press Magenta button again several times till hotel mode appears. 5 Using arrow keys on remote navigate down to the volume setting & increase graphic slider with the arrow right button to max setting (Mine was set to min). Navigate up to Hotel ON & change to OFF. 6 Press OK 7 Press Exit. | ||
| Ferguson | TX807 | Faint vert line on lh side of pics - causes other sets in vicinity to display same symptom | capacitor CL01 10nF had never been soldered at one end. | ||
| Ferguson | TX807 | Dead | DP27 24v zener |