Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Ferguson | TX807 Proline 1415 | dead, tripping | replace SMD RL41 22k (CPC order RE00095) | ||
Ferguson | TX807 Proline 1415 | dead, TP20 s/c and RP01 o/c | replace DP21 (80444020), DP27 (60447870), RP01 (10547070), TP20 (20818740), TP22 (16000930), TP25 (16001110) | ||
Ferguson | TX807 Proline 1415 | dead, no LED | DP26 BAV21 leaky causing start-up voltage to drop to zero | ||
Ferguson | TX807 Proline 1415 | blue line on LHS of pic | replace TV04 BC848B | ||
Ferguson | TX807 M7017U | Pic cuts off on dig Txt | IV01 TDA9554 U/S | ||
Ferguson | TX807 M3615UT | LED stays green for 6 secs at sw on then reverts to st/by | DL04 BY288 in E/W mod cct leaky | ||
Ferguson | TX807 M3615UT | Dead apart from red LED pulsing - In Child Lock | To release - Sw on TV at mains whilst holding in Magenta Txt key | ||
Ferguson | TX807 D14R | Burst of EHT at sw on then reverts to st/by | RP68 0R68 safety res o/c near LOPTx | ||
Ferguson | TX807 | Weak dist sound | CI04 10n sm cap faulty in series with sound det LI02 | ||
Ferguson | TX807 | Trips - LED alternates Red/green | Check pin 50 IC IV01 TDA8842 - should be <3.85v, if not goes into prot mode | ||
Ferguson | TX807 | To run with lop stage dis'd | Dis pin 1 loptx & s/c base TP52 to chassis. Cvonnect lamp to DP80 ; HT = 105v | ||
Ferguson | TX807 | To access serv mode | 1 sw on tv, 2 put in st/by with R/C, 3 sw off, 4 Sw on holding magenta r/c key, 5 When pic appears press magenta button again & follow onscreen directions - values stored automatically | ||
Ferguson | TX807 | St/by only | DP12 / DP36 s/c BA157 - beware of charged up smoother! | ||
Ferguson | TX807 | Reduced height | EEPROM possible fault - obtain from CHS | ||
Ferguson | TX807 | Poor start up | DP57 6v8 zener |