Dicas Reparação
Modelo - Chassis TCDD3
Pesquisa: TCDD3 Enviar Dica Resolvida
Resultados 29
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | TCDD3 | MODE GEAR D SLIPS TOOTH | To Tokyo: It has come to our attention that Mode gear D isneeded as a replacement part. Due to the softer material this gears teethdeform and cause the other gears E and C to slip. This slippagecauses mechanical timing problems. We await your reply. F | ||
| Sony | TCDD3 | PREVENTING FLEX CABLE DAMAGE AFTER REPLACING DRUM ASSEMBLY | After installing the new drum assembly, short flexcable may be damaged when re-installing the tape pass cover (ref. 112). | ||
| Sony | TCDD3 | CAUTION INDICATOR APPEARS AFTER A FEW SECONDS OF PLAY | After a few seconds of play, the caution indicator appears.Noticed Reference No. 112 was bent and touching drum assembly. There wasno indication that the unit had been dropped. | ||
| Sony | TCDD3 | REPLACEMENT GEARS FOR MECHANISM | The mechanism gears are still not available for the TCD-D3. -HQ COMMENTS: According to Tokyo's fax A911168 dated August 21, 1991,the gears will be available soon and will be registered in WRPC. Wehave found the mode E gear to be the most requested gear | ||
| Sony | TCDD3 | ENCODER ALIGNMENT IN A LOADED POSITION | If a gear breaks during the load sequence, it is difficult toalign the mechanism after replacing the broken part. | ||
| Sony | TCDD3 | MECHANICAL ALIGNMENT AFTER REPLACING GEARS | If a gear breaks during the load or unload sequence, there isno reference material available to align the mechanism or encoders afterreplacing a broken gear. -HQ COMMENTS: A service bulletin outlining the proper procedure for gearalignment has been writ | ||
| Sony | TCDD3 | WARRANTY PERIOD | What is the correct warranty period? The warranty book onpage 28 states 90 days labor and one-year parts. The CIC computer showslabor and parts 1 year. -HQ COMMENTS: Tokyo states the warranty period of the TCD-D3 as 1 yearparts and 90 days labor. | ||
| Sony | TCDD3 | INTERMITTANT RECORD ON 1 CHANNEL | Intermittently will not Record on one channel. Found connec-tor (CN-301) from Main board to Line-amp board is loose. | ||
| Sony | TCDD3 | AC ADAPTOR HUM | Unit produces a loud hum through stereo speakers when using ACadaptor. Hum is not present when using battery. Customer uses profess-ionally. Although unit is Hong Kong model (100V), customer had same pro-blem with seven different units from his dealer | ||
| Sony | TCDD3 | NO EJECT | Unit will not eject. | ||
| Sony | TCDD3 | TCD-D3 TEST MODE | The test modes in the TCD-D3 service manual are confusing, anddifficult to use. -HQ COMMENTS: A service bulletin has been created (See S/B 157- TestMode Clairification) refer to this S/B when using the test modes. | ||
| Sony | TCDD3 | WILL NOT LOAD TAPE | Unit will except and reject a tape but will not load a tape.Applied external DC to motor still would not turn. Turned worm gearslightly motor turned, unit would load tape and was not able to see any-thing wrong. | ||
| Sony | TCDD3 | INTERMITTANT HEADPHONE JACK | Headphone connection is intermittant. I found the internalconnections had loosened from repeated insertion and removal of phones. -HQ COMMENTS: I opened the unit and removed the headphone jack. Iremoved the three sections of the J-303 and adjusted the | ||
| Sony | TCDD3 | HEAD DRUM SPINS ERRATIC/IC-502 | The tape would wrap when inserted and the door is closed.When the play button is depressed, the head drum spins erratically. Thereis no audio output and the display reads caution after approximately5 seconds. -HQ COMMENTS: I checked the output of the d |