Dicas Reparação
Modelo - Chassis STRAV910
Pesquisa: STRAV910 Enviar Dica Resolvida
Resultados 23
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | STRAV910 | UNIT DEAD - NO POWER OR DISPLAY | Unit is dead. No power and no display. | ||
| Sony | STRAV910 | MICROPROCESSOR RESET | Refer to FPR number L0613. -HQ COMMENTS: System malfunctions caused by the microprocessor lockingup can usually be traced to either a supply voltage problem, or aninterface problem. Resetting, and in extreme cases, replacing the microis the only way to | ||
| Sony | STRAV910 | OUTPUT TRANSISTORS DEFECTIVE | Several units to date with two output transistors defectiveand F-801/802 open. Checked driver and other transistors - all ok. | ||
| Sony | STRAV910 | MICROPROCESSOR RESET | When switching the surround from any mode to simulated (i.e.dolby to simulated, live to simulated etc.), the main and surroundspeakers mute. When switched off or back to any other mode, only thesurround speakers come back on. By switching the input sele | ||
| Sony | STRAV910 | WRONG PART NUMBER FOR 6 PIN OUTPUT JACKS J403-J405 | The part number listed in the manual for the output jacks areall the same regardless if it is a 4 pin or 6 pin jack. | ||
| Sony | STRAV910 | UNIT IN PROTECT | Unit in protect. Amp o.k., drivers, pre-drivers, etc. | ||
| Sony | STRAV910 | NO SURROUND OUTPUT OR LOW SURROUND OUTPUT | Customer complains of no output from the rear surround outputsor low output. Other complaint is that the surround output varries inlevel. Sometimes there is much output and other times during same programthere is no output. -HQ COMMENTS: The output to | ||
| Sony | STRAV910 | PART NUMBER FOR TOP CABINET STRAV910/1010 | Part number is missing from manual/retrieved from Tokyo. Thepart number is 4-925-039-11. |