Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | SPPS10 | STATIC FROM BASE UNIT DURING STANDBY | |||
Sony | SPPS10 | BUZZING NOISE FROM BASE UNIT | I have seen this problem on several units - after the baseunit gets hot, you hear a loud buzzing sound. | ||
Sony | SPPS10 | STATIC IN HANDSET | Static reception. Found C-503 on RF input section of handsetRF PCB was touching other sections of (RF) board. | ||
Sony | SPPS10 | LOW VOLUME IN HANDSET SPEAKER | Low vol-hndset spkr vol cntl does not incrse it-even on high. | ||
Sony | SPPS10 | UNIT WOULD NOT OPERATE | Base unit was locked up. When AC adaptor was plugged in, unitwould not operate. Found problem in reset circuit. | ||
Sony | SPPS10 | RESET PCB CHANGE | The circuitry that was previously on a separate reset PCB isnow included on the Main PCB. The circuit design appears to be the same. -HQ COMMENTS: Thanks for letting me know about this. I faxed Tokyo andthey will send an updated PCB layout. They told | ||
Sony | SPPS10 | HANDSET AND BASE DO NOT COMMUNICATE | Base unit LED lights. Handset talk LED will not light whentalk button pressed. | ||
Sony | SPPS10 | NO AUDIO ON HANDSET | Dead - no sound on handset. Talk LED on when in talk mode. | ||
Sony | SPPS10 | NO TALK MODE | Base unit would not receive signal from handset. Foundreceive section operating normally on both channels but unit would notcome on. (IN USE) LED stayed off. | ||
Sony | SPPS10 | HANDSET POWER LOCKED ON, NO FUNCTIONS | Received several units that would not go into battery save(Standby) mode. Removing battery would not reset the unit. When batteryis reinstalled, the battery LED comes back on. The handset will notfunction in any way at all. Also pertains to serial nu | ||
Sony | SPPS10 | NO FUNCTION | Base unit will not work - push intercom (page) and the unitwill not transmit to the handset. No talk mode on handset. In use leddoes not come on. |