Dicas Reparação
Modelo - Chassis S5400DMD
Pesquisa: S5400DMD Enviar Dica Resolvida
Resultados 1
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Telefunken | S5400DMD ICC10 | At switch on the Led Blinks 3 times, supply tries to come up with a Tick-Tick sound. After trying 4 times to come up it goes to error standby with Led blinking very fast. Error code 3 | Make sure primary side of power supply is ok by desoldering jumper JL26, connect Pin 3 of IL01 protection to pin 4 ground. Bypass DP127. Put 100W/230V lamp on usys. Turn on the set the lamp should glow and pot PP120 should regulate it. I found CL007, CL015 and TL003 shorted |