Dicas Reparação
Modelo - Chassis PSLX5
Pesquisa: PSLX5 Enviar Dica Resolvida
Resultados 21
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | PSLX500 | INCORRECT CONNECTION OF PHONO GROUND | When setting volume about half way up, we hear a buzzing soundfrom right channel only. The ground lead of right channel cartridge leadis connected to ground of system control board ground. We are picking upmicroprocessor noise via this ground lead. | ||
| Sony | PSLX55 | ERRATIC MOVEMENT OF TONE ARM | The tonearm on this unit would cue into the record at afaster pace than it would cue in the outward direction. Glue on the PCboard has erroded and was responsible for changing the DC level on Pin 1of IC202. A resultant -2.5 VDC was present at IC202's o | ||
| Sony | PSLX5 | INCORRECT SET - DOWN POINT | When a 12 record is placed on turntable, tonearm goes to7 position. Replaced Q209 with new type transistor 2SA1027R, as perS/B #155. This transistor insures pull in of the size solenoid. | ||
| Sony | PSLX500 | AUDIBLE NOISE | Low level thump or rumble like noise is heard when everhorizontal drive motor moves tonearm. | ||
| Sony | PSLX5 | INTERMITTENT SWITCH | The tone arm would go into 45 disc position instead of droppoint for 33 size. Only at first cycle, then no more failures. | ||
| Sony | PSLX500 | DEFECTIVE SOCKET | The copper sleeves in the socket of the P-mount were pushedall the way back into the tone arm. I have received several reports onthis problem. |