Dicas Reparação
Modelo - Chassis MZ
Pesquisa: MZ Enviar Dica Resolvida
Resultados 96
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | MZR2 | NO PLAY, SLED DOESN'T MOVE (REPLACED FLEX CABLE REF. 761) | The unit did not play, and the sled would not move. | ||
| Sony | MZR2 | BATTERY DISCHARGES PREMATURELY THROUGH DC ADAPTER | If the DCC-E160L or DCC-E260L car battery cord is left pluggedinto the unit, but the cigarette lighter plug is not connected to thecigarette lighter socket, the unit's rechargeable battery may dischargethrough the power indicator LED on the adapter. | ||
| Sony | MZR2 | INTERMITTENT DROPOUTS IN RECORDING, SOUNDS LIKE SKIPPING | Customer complained of skipping, but problem was that the unitwould have dropouts in the recording. Found that the arm from which themagnetic record head is suspended was bent, resulting in the face of thehead not resting flatly on the disc surface. Th | ||
| Sony | MZE2 | BATTERY DISCHARGES PREMATURELY THROUGH DC ADAPTER | If the DCC-E160L or DCC-E260L car battery cord is left pluggedinto the unit, but the cigarette lighter plug is not connected to thecigarette lighter socket, the unit's rechargeable battery may dischargethrough the power indicator LED on the adapter. | ||
| Sony | MZE2 | LCD NOT USABLE WHEN CAR CONNECTING PACK IS USED | The customer may complain that when he/she uses car connectingpack, the LCD is not usable because the cassette adapter and the headphonecord (which contains the LCD) cannot be pluged into the unit at the sametime. | ||
| Sony | MZE2 | DISPLAY SHOWS DISC ERROR | Customer complained that unit showed Disc Error on display. | ||
| Sony | MZ1 | UNIT ENTERS TIME-SETTING MODE WHEN RECORD BUTTON PRESSED | When putting unit into record the unit would enter the timesetting mode. | ||
| Sony | MZR2 | CUSTOMER COMPLAINS OF INSUFFICIENT HEADPHONE VOLUME LEVEL | Customer complained of insufficient volume level fromheadphones. Noticed that the customer had the AVLS (automatic volumelimiting system) switch on the headphone remote set to the ON position. | ||
| Sony | MZR2 | UNIT MAKES A CHIRPING NOISE (REPLACE IC603) | Unit would make a chirping noise. | ||
| Sony | MZR2 | NO OPERATION FROM BATTERIES, DISPLAY INDICATES LOW BATTERY | The unit would not operate from AA batteries. The displayshowed a low battery condition. The customer complained that the unitdrained the batteries prematurely. | ||
| Sony | MZR2 | UNIT WILL NOT LOAD DISC FULLY | A disc could be inserted into the mechanism, but would notstay locked into the mechanism when you removed finger pressure from thedisc. | ||
| Sony | MZR2 | DOES NOT PLAY M.O. DISCS, DISPLAYS "DISC ERROR"; CD DISCS OK | The unit would intermittently not play M.O. type discs, andwould show Disc Error on the display. The unit played CD type discs(pit discs) with no problems. Found that the M.O. traverse adjustmentwas way off. | ||
| Sony | MZR2 | DOES NOT PLAY, DISPLAYS "DISC ERROR" FOR PIT & GROOVE DISCS | The unit will intermittently not play pit or groove discs.Disc Error would appear on the display. Noticed that the MO (groove)and CD (pit) Traverse adjustments were way off. | ||
| Sony | MZR2 | AUDIO DROPOUTS, SIMILAR TO SKIPPING; LOW RF LEVEL | Customer complained of distorted audio, but the symptom couldmore acurately be called audio drop-out, which sounds likeconventional CD skipping. Found that the RF level for both pit and groovetype discs was low (below 0.5V p-p). | ||
| Sony | MZR2 | TOP COVER DOES NOT LATCH, UNIT DOES NOT FUNCTION | The top cover would not latch, and the unit would notfunction. Found that a chrome-plated plastic piece (found inside thefront of the top cover) was not firmly mounted against the front lip ofthe top cover as it should be. This piece is used to latch t |