Dicas Reparação
Modelo - Chassis LG
Pesquisa: LG Enviar Dica Resolvida
Resultados 556
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Nikkai | TLG1433 | Very slow start up and Ht too high | C909 47uF 25v should reduce Ht , C916 220uF 35v should speed up switch on | ||
| Nikkai | TLG1433 | Pic too large | C909 47µ 25v | ||
| Nikkai | TLG1433 | Onwa chassis | See ONWA faults | ||
| Nikkai | TLG1433 | No sound | R650 22k hi res | ||
| Nikkai | TLG1433 | No raster | ZD401 12v; R414 8R2 2w: C909 47µ | ||
| Nikkai | TLG1433 | Long time to come on - relay not energising | C916 220µ 35v in 18v supply leaky | ||
| Nikkai | TLG1432 | St/by only | No line drive - o/c L404 choke in base of 2SD1546 line o/p from sec of line driver transformer. | ||
| Nikkai | TLG1409 | Field collapse | R306 10R safety res o/c | ||
| Nikkai | TLG1409 | Dead. A squealing noise came from the chopper powe | C617 ( 4 , 700pF , IkV ) which had split open and was very hot. ( connected across the IO9V HT rectifier diode D116 , in series with | ||
| Nikkai | TLG1409 | Dead, squealing & heated smell | C617 4700pF 1kv split & leaky | ||
| Nikkai | TLG100T | Txt flashing & no OSD | IC303 SAA5243P/E on Txt pcb | ||
| Nikkai | TLG100T | Int dead | Dry joints on C174 (line feed) from line osc to driver | ||
| Nikkai | TLG100T | "O" symbols with tails fill screen on Txt & bar for analogue settings flashes | SAA5243P/E chip faulty (£25) | ||
| Nikkai | TLG0101 | No frame. | R313 ( 8.2ohm ) o/c , Q310 , Q301 ( 2SA940/2SC2073 ) . | ||
| Matsui | 1401 TLG0101 | No frame. | R313 ( 8.2ohm ) o/c , Q310 , Q301 ( 2SA940/2SC2073 ) . |