Dicas Reparação
Modelo - Chassis KV27XBR95
Pesquisa: KV27XBR95 Enviar Dica Resolvida
Resultados 22
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | KV27XBR95S | NO CHANNEL CAPTION IN AUX MODE, NORMAL | In the aux mode the customer can not use the Channel Captionfeature (example channel 4 as NBC). When they bring up the menu thescreen turns gray. There is no mention of this in the Owners Manual. -HQ COMMENTS: This is normal operation, the Channel Cap | ||
| Sony | KV27XBR95S | INOPERATIVE SET, REPLACE IC-1402 OR IC-1401 ON A BOARD | Unit comes up and shuts down. Problem is with either IC-1402or IC-1401 being shorted. Technician in Burbank says he has seenseveral units. | ||
| Sony | KV27XBR95S | INOPERATIVE SET, REPLACED IC-1401 | Relay would not click when power button is pushed. It wouldclick when unit is plugged into AC. Unplugged connector G-5 on G boardand power switch would work. | ||
| Sony | KV27XBR95S | INTERMITTENT VOLUME LEVEL, SEE TV SERVICE BULLETIN # 163 | When in the SRS mode, periodically the volume drops by 70percent. If the channel is changed, the volume still remains low. Aftera minute or so, the volume will return to normal. Usually the problemoccurs in repeated succession for 30 minutes or more. | ||
| Sony | KV27XBR95S | TICKING SOUND WHEN CHANNEL CHANGE, NORMAL | San Diego SSC home technician informed me of a problem that heis unable to resolve. When channel up/down is used the set produces aticking sound (not popping) through the speakers. -HQ COMMETS: We have a 32XBR95S in our lab. When changing channelsthere | ||
| Sony | KV27XBR95S | FUSE INSIDE SPEAKER BOX PART NUMBER, 1-518-645-11 | Part number for the fuse (lamp) inside the speaker box ismissing from the service manual. -HQ COMMENTS: The part number is 1-518-645-11. | ||
| Sony | KV27XBR95 | CH CAPTION, REPLACE THE EEPROM ON THE Y2 BOARD | See page 25 of service manual 1-2 customizing the screendisplay. When you get to step 3, the CH Caption turns gray and when youtry steps, nothing happens. Please advise. What generates thisoperation? -HQ COMMENTS: Check on the Y2 Board the EEPROM, |