Dicas Reparação




Modelo - Chassis KV2782R


Pesquisa: KV2782R Enviar Dica Resolvida
Resultados 22
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyKV2782R
VERTICAL LINES AND VIDEO COLLAPSED, REPLACED YOKE At turn on a 2 wide bar appeared on the screen with verticalretrace lines. Scoped Pin 2 of IC501 on D board the vertical pulse had alot of noise and Pin 5 read 6V. Checked all components in the area andused freeze spray unit OK for about 5 min. Traced
SonyKV2782R
POP IN SOUND, REPLACE CAP, SEE SB #258 AND #259 When broadcast video switches to over modulated pix, pop insound is heard. -HQ COMMENTS: See S/B #258 and #259. The countermeasures outlinedtherein may fix the present problem.
SonyKV2782R
BLANK AREA TOP LEFT CORNER OF SCREEN, REPLACE IC-301 Picture blanked out top of left of screen, then go off afterone minute.
SonyKV2782R
COULD ONLY BE TURNED ON AND OFF, NO OTHER FUNCTIONS, IC-501 Set could only be turned on and off. No video, or any otherfunctions. Raster was visible with screen control turned up. Trouble-shooting revealed no vertical pulse at TP-35. No DC voltage at collectorof Q506 and distorted pulse at Pin 2, IC501. Also
SonyKV2782R
SWOOSH NOISE AT POWER OFF, SEE SB CTV0259 When tuning power switch off a swoosh noise appears at thespeaker.
SonyKV2782R
SNOWY PIX, REPLACE ANTENNA SW Q-112 On this model and models with related circuit the followingsymptoms may occur: snow, snowy pix, adjacent channel interference,interference from auxiliary terminal.
SonyKV2782R
NO CASTERS, THIS MODEL COMES WITHOUT CASTER The new product information sheet from Home Office and the S/Mboth clearly state this product has casters. The San Diego Plant is notproducing this product with casters. -HQ COMMENTS: There are mistakes in both S/M as well as sales brochurein regard to


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads