Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | KV20XBR | UNIT STAYED IN RGB MODE AND SLEEP | Unit stayed in RGB mode and sleep. Remote inoperative, frontpanel controls inoperative except for power on/off. Screen black. | ||
Sony | KV20XBR | DEAD UNIT | Dead. F601 was opened. | ||
Sony | KV20XBR | P/N FOR M BRACKET AND SHIELD CASE POWER SUPPLY BLOCK | I need the part numbers for 1) the plastic frame that the Mand D boards are mounted to, and 2) the metal cage that the GA and GBboards slid into. -HQ COMMENTS: The part numbers you asked for are as follows: 1) M. Bracket: 4-374-217-1 | ||
Sony | KV20XBR | WILL NOT POWER OFF MANUALLY | All functions worked except for manual power on/off. Whentrying to power off manually, the screen would blank and all the presetswould change (pix, color, hue). | ||
Sony | KV20XBR | CHANGING PURITY, CRT | The purity would change when the unit heated up. Also itwould change when the set was vibrated/shocked. | ||
Sony | KV20XBR | FLASHING CHANGE IN VIDEO LEVEL AT TURN ON, IC101 | When set first turned on, there would be a rapid flicker andchange in video level for about 5 or 6 sec, then pix was OK. This problemwas noted at base of Q403. At turn on, this voltage was very low andpulsating. Further checks revealed the problem to | ||
Sony | KV20XBR | UNIT WILL NOT COME OUT OF RGB MODE | Unit stayed in RGB mode. Remote inoperative, front panelcontrols inoperative except for power on/off. Screen black. | ||
Sony | KV20XBR | NO COLOR AND HUE DISPLAY, REPLACED IC107 | No color and hue display. |