Dicas Reparação




Modelo - Chassis KPR36XBR


Pesquisa: KPR36XBR Enviar Dica Resolvida
Resultados 26
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyKPR36XBR
RGB CHARACTERS STAY ON, REPLACE IC-103 P/N 8-759-944-04 RGB characters keep popping on and stay all the time.
SonyKPR36XBR
DISTORTED STEREO SOUND, REPLACED IC-8810 Unit had distorted, low level audio in stereo mode. Noneperformed normal.
SonyKPR36XBR
INTERMITTENT VIDEO, REPLACED D-5015 Several units display same problem, found D-5015 was opening.
SonyKPR36XBR
ABOUT TWO LINES OF FOLD OVER, REPLACED R-5175 Fold over 1/3 from top of screen about 1 to 2 lines of fold-over. Resistor R5175 changed value from 5K to 15K (Bias Resistor).
SonyKPR36XBR
SNOWY PICTURE, RESOLDERED SWAF CIRCUIT Set was very snowy and had a very bad ghost. Tuner and pres-caler had been replaced. Video out of IC201 pin 20 looked very weak.Found by touching SWAF coil picture would improve. Resoldered all connec-tions (SWAF), problem resolved.
SonyKPR36XBR
IC-5007 P/N INCORRECT, 8-759-708-12, ALSO SEE CORRECTION 2 Both IC's are listed as same in manual. Both have 78L12marked on case, but cases are different, as well as basing. Pls advise.Also, waveforms on Page 73 seem to be misnumbered. 7 on schematic isreally waveform 8, 8 is 9 etc. Please advise. -HQ COMME
SonyKPR36XBR
CIRCLE ON SCREEN, DEFECTIVE SCREEN A perfect circle (like somebody drew it using a compass)was on screen. More obvious when looking at sides, with or withoutpicture.
SonyKPR36XBR
NO LEFT CHANNEL, RESOLDERED IC5008/PIN 7 One speaker dead.
SonyKPR36XBR
NO AUDIO, CRACKES ON "E" BOARD No audio. E board cracked across corner of audio ckts.Possible hidden damage from shipping.
SonyKPR36XBR
BROKEN PICTURE CONTROL BUTTONS, REPLACED FRONT ASS'Y Picture up/down buttons broken.
SonyKPR36XBR
NO PICTURE OR SOUND, REPLACED D-603 No pix, no sound. Sleep LED turns on and off when powerswitch operated.


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads