Dicas Reparação
Modelo - Chassis ICC9
Pesquisa: ICC9 Enviar Dica Resolvida
Resultados 118
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Ferguson | ICC9 | lop tr gets hot quickly - then blows | TL61 2SC2655 line dr faulty tho checked ok | ||
| Ferguson | ICC9 | Int won't come out of st/by | T66 (BC858 smd) was leaky | ||
| Ferguson | ICC9 | Int trip/dead with led flashing or absent | TP78 BC848B in trip cct | ||
| Ferguson | ICC9 | Int trip with failure of LOPTr | RV01 10R safety res gone hi - next to STV2160 IV01 | ||
| Ferguson | ICC9 | Int sw off with black line down centre of screen when heated | C123 - cap near scan coils | ||
| Ferguson | ICC9 | Int sigs/snowy - tap sensitive | TC03 BC858B sm | ||
| Ferguson | ICC9 | Int picture. | 27Mhz XTAL TEXT BOARD | ||
| Ferguson | ICC9 | int line sync when heated | STV2160 chip IV01 - change CV46 to 33n | ||
| Ferguson | ICC9 | Int dead | dry joints IP03 reg | ||
| Ferguson | ICC9 | Int dead | Supply to line drive chip IV01 STV2160 drops in fault condition (no line drive) - DV01 1N4001 int | ||
| Ferguson | ICC9 | goes to st/by when sw on | TDA2616 sound chip | ||
| Ferguson | ICC9 | Field jumping | 25Hz wfm at pin 20 IV01 STV2160where ther should be none - CV11 100nf o/c | ||
| FERGUSON | ICC9 | E/W DISTORTION | REPLACE CL42 4.7MFD160V | ||
| Ferguson | ICC9 | E/W dist | CL42 4µ7 160v | ||
| Ferguson | ICC9 | Dead due to LOPtr failure - gets hot quickly | 6 x 1N4001 diodes in base drive - 1 was faulty - replace all |