Dicas Reparação




Modelo - Chassis FX310


Pesquisa: FX310 Enviar Dica Resolvida
Resultados 22
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyCCDFX310
CRT PART NUMBER UNLISTED/CHECK CCD-FX620 MANUAL PAGE 185 This unit had the VF51 ckt board as per EVF type B noted inthe CCDFX620 service manual however, the CRT type M01KTA8WB part number isnot included in the service manual information as per FPR O0761. We foundpart number 145256511 listed for this CRT type
SonyCCDFX310
NO CAMERA PICTURE E-E/REPLACE IC 704 There was no camera picture E-E and there was intermittentcharacter display. When character display rolled vertically, I foundthere was no VD out at pin 73, IC704.
SonyCCDFX310
PART NUMBER FOR MODE SELECT SWITCH What is the part number for the Mode Select Switch? -HQ COMMENTS: Part number is 1-572-986-11.
SonyCCDFX310
MULTIPLE LINES IN VIEWFINDER SCREEN Multiple lines running horizontally in viewfinder screen.Upon examination of waveform at IC-501, pin 3, (vertical drive out) Ifound the following waveform: The irregularity occurred every threecycles.
SonyTCFX310
CIRCUIT CORRECTION IN SERVICE MANUAL Circuit from Pin 15 of IC502 is improperly routed to theerase prevention switch (S711). Pin 15 should connect to circuit betweenS711 and S701 (control switch board). -HQ COMMENTS: Your analysis of the problem is correct. We will issue aservice bulleti
SonyTCFX310
DESIGN CHANGE IN REMOTE CIRCUIT Unit would switch and stay in record mode when remote cablewas connected. Found IC502 bad and also a shorted diode which is notshown in service manual. This diode is connected to Pin 16 of IC502 andground. I would like to know the P/N of this diode AS
SonyFX310
NO AUDIO No audio - any function. Acts like bad function switchbecause if applied additional pressure on knob volume works - releaseknob - no audio.


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads