Dicas Reparação
Modelo - Chassis FS
Pesquisa: FS Enviar Dica Resolvida
Resultados 1630
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CFSW470 | NO STOP/EJECT DECK A | Spring pops off #152 lever play B. #152 lever will depressbut will only partially come up. | ||
| Sony | CFSW430 | NO AUDIO FROM BOTH TAPE DECKS - REPLACE IC101, P/N 875924258 | Received signals through IC101/Pins 1 & 24, but no signalsout of IC101/pins 5 & 20. | ||
| Sony | CFS904 | NO POWER WITH AC ADAPTOR - REPLACE F901, P/N 1-532-675-00 | The unit has no power with the AC power adaptor, but does havepower with the batteries, this is due to F901 being open. | ||
| Sony | CFS1030 | NO AUDIO - REPLACE Q304, P/N 8-729-177-32 | No audio output. | ||
| Sony | CFS1030 | DOOR OPENS ON STOP INSTEAD OF EJECT. | #251 lever line breaks off under #203 lever, stop. #206slider (s), eject therefore selected when stop is pressed. | ||
| Sony | ICFSW77 | PC261M ADAPTER PLUG NOT AVAILABLE (USE 1-506-521-11) | The owner's manual indicates that the PC261M adapter should beused when making recordings at a pre-determined time onto a tape recorderequipped with a remote-in jack. The PC261M is not available through salesor WRPC. | ||
| Sony | CFS1140 | MECHANICAL NOISE FF/REW AND AUTO REV SHUTOFF | |||
| Sony | CFS1040 | MECHANICAL NOISE FF/REW AND AUTO REV SHUTOFF | |||
| Sony | CFS1140 | NO AUTO SHUTOFF AND/OR NO RECORD AFTER DIRECTION CHANGE | No record - button will not depress. Moving Ref#132 lever(erase N) or Ref#128 lever (erase R) will not help. Ref#228 spring fallsout of slider (FR) which causes no auto shutoff (continuous cycle only).The end connected to #229 slider (Mode A) falls out | ||
| Sony | CFS1040 | NO AUTO SHUTOFF AND/OR NO RECORD AFTER DIRECTION CHANGE | No record - button will not depress. Moving Ref#132 lever(erase N) or Ref#128 lever (erase R) will not help. Ref#228 spring fallsout of slider (FR) which causes no auto shutoff (continuous cycle only).The end connected to #229 slider (Mode A) falls out | ||
| Sony | CFS1140 | INTERMITTENT OR NO FWD PLAY | Ref#119 gear (base), head becomes bent, therefore, Ref#117spring (head) torsion does not complete its cycle. Also, Ref#144 gear(NR) cam has insufficient motion to complete its cycle. | ||
| Sony | CFS1040 | INTERMITTENT OR NO FWD PLAY | Ref#119 gear (base), head becomes bent, therefore, Ref#117spring (head) torsion does not complete its cycle. Also, Ref#144 gear(NR) cam has insufficient motion to complete its cycle. | ||
| Sony | CFSD960 | REPLACEMENT HEAD HAS EXTRA WIRE - JUMPER YELLOW AND BROWN | Original head had six wires. | ||
| Sony | IFS50K | NO AUDIO OUT OF RIGHT CHANNEL - REPLACE C-161 (1-126-191-11) | There was no audio out of the right speaker, it only hissed.I found C161 ripped (missing) off PC board. | ||
| Sony | CFS210 | PART NUMBER FOR MAIN BOARD | The part number given in the service manual supplement-1 forthe CFS-210 is not the right board. The board has no bias oscillator. |