Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | CFS55 | STOP LEVER NOT PROPERLY POSITIONED | No audio when placed in play, but tape is erase, recordnormal. | ||
Sony | CFS55 | BELT SLIPS OFF | If the unit comes in with BELT OFF my S/S advises me that oneshould change the belt along with any repair or it will come back as aRE-REPAIR in a short time. -HQ COMMENTS: Replace the motor pulley when the capstan belt slippedoff the motor pulley in the | ||
Sony | CFS45 | PCB MOUNTING SCREW BREAKS FOIL TRACE | Circuit board mounting screw is tightened too much. Cracksbreak B+ path to function switch. | ||
Sony | CFS71 | LUBRICATION IN SWITCH ASSY NEEDED | When the Fast Fwd/Rewind switch is activated by the switchlever assy, binding of the two nylon pieces can occur. This causes themuting switch to stay in the ON position. The audio is then greatlyreduced. This condition occurs most often when the AMS f | ||
Sony | ICFS5W | SOLDER CONNECTION | Sound would come on loud then become low and distorted. | ||
Sony | CFSD7 | LEVER NEEDED BENDING | Solenoids would click but tape mechanism would not move.Lever A would rise over cam gear A causing the mechanism not to bepushed down into gear. | ||
Sony | CFSD7 | LINK LEVER BINDING | Cannot place tape deck in any mode. Forward LED on all thetime. | ||
Sony | CFS55 | DEFECTIVE R308 AND SWITCH | B+ section of switch malfunctions either on tape or radio orboth at same time, also affects battery operation. R308 was also open. | ||
Sony | CFS55 | DEFECTIVE LOCK PLATE | Buttons jammed up, lock plate too soft. | ||
Sony | CFS45 | BELT COMES OFF | Tape would not move in any direction. Found belt off motorpulley. |