Dicas Reparação




Modelo - Chassis FS


Pesquisa: FS Enviar Dica Resolvida
Resultados 1630
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyCFSW510
SERVICE MANUAL AVAILABILITY There is no service manual available for this unit. -HQ COMMENTS: The service manual for this unit will be late. Pleaserefer to the service manual for the CFS-W380 since this unit is verysimilar. The part number for the head assembly you needed isX-33
SonyCFS902
PART NUMBER LISTED FOR S302 IS WRONG Part number 1-570-347-31 is a two-position switch. This isthe wrong switch. It needs to be a three-position switch.
SonyCFS903
PART NUMBER LISTED FOR S302 IS WRONG Part number 1-570-347-31 is a two-position switch. This isthe wrong switch. It needs to be a three-position switch.
SonyCFSW404
INCOMPLETE/INCORRECT PART LISTING FOR M-471/M-481 CFS-W404 manual pg. 26 & 27 parts M-471, M-481 (X-3330-617-1,X-3330-616-1) are described as motor assembly with pulley. Part receivedis pulley only. Part described is pulley assembly motor. What is partnumber for motor? Also, please change descriptio
SonyCFS4000
REPLACEMENT COUNTER BELT DOES NOT FIT Replacement counter belt is too large by about 1cm. The beltis replaced by part number 3-642-544-XX. Please advise us as to anotherpart number. -HQ COMMENTS: The counter belt, ref. 359, part number 3-434-110-XX isreplaced by part number 3-657-035-XX.
SonyCFS903
FUNCTION BUTTON DOES NOT LOCK IN POSITION The switch will not stay in position due to the elasticity ofthe rubber cover on the switch. The rubber is so stiff that the switchis forced back to its center position. -HQ COMMENTS: Tokyo Fax (A900272): An improved Rubber Cover (Ref #61)has been mad
SonyCFS930
WRONG MOTOR Original motor is EG500AD9F, 9 Volt, clockwise rotating.When new part received, it has same part number, but is EG530AD9B, 9 Volt,counter-clockwise rotating. Reversing wires is no good, because regulatorthen works improperly. Also, replacement motor is
SonyCFS902
FUNCTION BUTTON DOES NOT LOCK IN POSITION The switch will not stay in position due to the elasticity ofthe rubber cover on the switch. The rubber is so stiff that the switchis forced back to its center position. -HQ COMMENTS: Tokyo Fax (A900272): An improved Rubber Cover (Ref #61)has been mad
SonyCFSW510
PART NUMBER FOR AC ADAPTOR What is the part number for the AC adaptor? -HQ COMMENTS: This unit has a transformer (power supply) built in.Therefore, you only need an AC power cord. The part number is1-557-287-11.
SonyCFS20
SERVICE MANUAL AVAILABILITY Is CFS-20 a U.S. model and is a service manual available? -HQ COMMENTS: This is a 1981 Japanese model. We have a service manualthat you may borrow.
SonyCFSDW30
INCORRECT PART NUMBER LISTED The wrong transistor is received when the part number listedin the service manual for Q-359 and Q-363 is ordered.
SonyCFS9000
UNIT DOES NOT RECORD IN REV DIRECTION Unit is different than print. It does not have a reverserecord proof button. -HQ COMMENTS: This is an E model unit, not the US model. It only hasrecord in one direction.
SonyCFS930
MISSING PART NUMBER The part number for the part that interfaces between thefunction switch and the rubber knob which goes to the outside world is notlisted in the service manual. -HQ COMMENTS: The part is reference number 55. It is hard to tell fromthe drawing. The part
SonyCFSD20
POWER TRANSFORMER Supplied transformer - same part number, does not fit drilledholes. Drilling an additional hole for primary side allows new trans-former to work. -HQ COMMENTS: I will check with Tokyo and Kansas City Parts to see ifthe part has been changed.
SonyCFSW350
HIGH SPEED ADJUSTMENT High speed adjustment on page 5 of the service manual will notwork unless function switch is set to radio position. -HQ COMMENTS: To do the high speed adjustment, the function switch mustbe in the radio ON position. The normal speed adjustment will wor


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads