Dicas Reparação




Modelo - Chassis F7


Pesquisa: F7 Enviar Dica Resolvida
Resultados 183
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyCCDF70
NO ZOOM MOTOR DRIVE No zoom motor drive.
SonyCCDF70
FORTH TITLE DOES NOT SCROLL Customer claims the forth title of the CCD-F70 does not scrollis this normal? -HQ COMMENTS: No, the forth title should scroll.
SonyCCDF70
ZOOM BUTTON PART NUMBER ERROR Zoom button identified as reference No. 66 on page 151 of theservice manual, part number 3-724-526-01. Servicer ordered twice andreceived wrong parts. Either wrong part number in the manual or wrongpart in bin in Kansas City. -HQ COMMENTS: The problem
SonyCCDF70
NO POWER No power (also applies to serial number 212510).
SonyCCDF70
NO POWER/NO DISPLAY Unit had no power and no display.
SonyCCDF70
NO AUTO FOCUS IN TELE MODE Auto focus will not focus in Tele mode.
SonyCCDF70
SERVICE MODE AND ADJUSTMENT INFORMATION Servicer has requested service mode and adjustment proceduresfor this camera. How is the unit put in the service mode? Are the codesthe same as the V11? -HQ COMMENTS: Please refer to CCD-F50/F70 supplement 1.
SonyCCDF70
BROKEN LENS Lens looked as if twisted hard - breaking stop and AF blockunit.
SonyCCDF70
NO PICTURE No picture.
SonyCCDF70
NO POWER No power. Also pertains to serial number 23018.
SonyCCDF70
EJECTS HALF-WAY THEN RELOADS Would eject half-way stop and reload.
SonyCCDF70
AUTO FOCUS NOT WORKING PROPERLY When auto focus is on and telephoto is used, focus is off alittle.
SonyCCDF70
NEW UNIT DEAD Unit is dead out of the box. No output from DDCON.
SonyICF7601
NO SOUND; STUCK ON SW2-10 The unit had no sound, was (stuck) on SW 2-10 and would notturn off. We found a solder splash across Q-20 which apparently was thecause of IC-2 and D-16 being defective. Replacement of these threecomponents (Q-20, IC-2, D-16) resolved the problem. -HQ
SonySLHF750
SERVICE MANUAL CORRECTION: RMT-143 EXPLODED VIEW There is an error on page 241 of the service manual.


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads