Dicas Reparação ITT




Modelo - Chassis DIGI-3


Pesquisa: DIGI-3 ITT Enviar Dica Resolvida
Resultados 42
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
ITTDIGI-3
Picture unstable when warm.DPU IC faulty.
ITTDIGI-3
Picture shifted half way down.Replace D411.
ITTDIGI-3
Patterning effect.C209 ( 47uf ) , C234 ( 10uf ) in HF module.
ITTDIGI-3
No or intermittent remote control.Fit a 10k res between pin 6 and chassis IC404
ITTDIGI-3
Line sync pulling.C209 ( 47uf ) , C234 ( 10uf ) in HF module.
ITTDIGI-3
Horizontal bars over picture.IC1403 tuner inteface IC.
ITTDIGI-3
Frame - height reduced at top - bottom ok.D411 ( ZTK 6.8 zenor ) breaking down.
ITTDIGI-3
Frame - blank line at top of picture.R431 o/c.
ITTDIGI-3
Colour - colours not correct.X610 17m7 hz crystal faulty , PVPU IC630 faulty.
ITT3896 DIGI-3
Tuning - not storing.Replace IC1403 ( MEA2901 ) on control panel.
ITT3896 DIGI-3
Tripping.Faulty sound IC5 ( TDA2040 ) .
ITT3896 DIGI-3
Teletext - picture 2" to left on teletext.Replace IC02.
ITT3896 DIGI-3
Teletext - no teletext.Replace IC02.
ITT3896 DIGI-3
Teletext - flashing on 9's ect.Replace IC640 ( TPU2732 )
ITT3896 DIGI-3
Sound - hum or buzz if using via "0" on scartMOD. required ( screening to cover the digital mod )


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads