Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Hinari | CDTV2 | Power supply fault, clicking noise, nothing else | Check C629 100uF, 25v for o/c | ||
Schaub Lorenz | DS2 DTV2 | Procedure to enter service mode | Press and hold service button on PCB inside TV. Press `C` on remote. Press program no. where your test picture is, You are now in service mode | ||
Schneider | DTV2 | Shuts off after 20 minutes or so | Dry joint on FBT | ||
Ideal/Slx | IDTV28T/IDTV28N/SLX28T2/28N SM2 | EW fault then set went dead tripping, R711 on EW panel burnt | Check for dry joints on C620 0.47uF, 250V, if dry replace then check Q602 and R618 5K6. Also it is worth replacing Q580 anytime these sets come into the workshop with a BF422 |