Dicas Reparação
Modelo - Chassis DAEWOO
Pesquisa: DAEWOO Enviar Dica Resolvida
Resultados 18
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Wharfedale | M8 DAEWOO PT92 | Dead | LOPTr s/c, RV38 2R2 fusible o/c or hi res (behind heatsink at back of LOPTx)caused by dry joint on LD01 (often hidden under glue by LOPTx) | ||
| Proline | W28D1 DAEWOO | Excess width with bowing | Pin 8 of frame IC short to chassis. Replace I301 TDA8358J | ||
| Proline | 1485R DAEWOO Formenti | Reverts to st/by aft 65 secs | I501 micro u/s Part no 1DW3813DE1 | ||
| Proline | 1485R DAEWOO Formenti | No line drive | I501 micro u/s Part no 1DW3813DE1 | ||
| Panasonic | Z185 TX14B4T DAEWOO CP185 | Blank raster - OSG OK | Replace EAROM IC702 & C832; C863 in power supply; kit TZS9EK021(3 pence from SEME!) | ||
| Panasonic | TX14GV1 DAEWOO CP421 | Relay clicking No sound or vision | Check C840 47mfd and I807 TOP210PFI | ||
| Mitsubishi | C14M7B DAEWOO | Field collapse | Replace IC 301 TDA8356, & replace smoothing cap C309(47uF) with 22uf (ECEA 2A220)160 Volts. Across legs of capacitor fit a 0.1uF (ECQM2A104J),and the link marked R420 replace with 2R2/.5W safety resistor (ERQICI2HCJ2R2). Also check supply rail diode.(Part numbers are Panasonic BTW) | ||
| Hitachi | C2121T DAEWOO | Squealing with no sound/pic | Burning smell coming from IC301 TDA8356 FOP chip which was faulty | ||
| Goodmans | TVX201T DAEWOO | No sigs & patt | CC554 10pf leaky sm in IF | ||
| Goodmans | TVC202TS DAEWOO | Dead | D809 HER308G leaky. | ||
| Goodmans | TVC14VP DAEWOO CP310 | Dead with mains fuse o/c | Chopper tr, TDA4601 & C811 100µ | ||
| Goodmans | 285NS DAEWOO GB2898ST | Buzz on sound at low level | resolder fop chip heatsink | ||
| Goodmans | 285NS DAEWOO CP775 | Dead - faint tick from psu | Q401 2SD1880 LOPTr s/c, D406 BYW95C s/c - both caused by LOPTx faulty (HR7927) | ||
| Goodmans | 285NS -DAEWOO | To set up height | Reqs special handset | ||
| Goodmans | 215N DAEWOO CP365 | Dark pic & EHT crackling | C811 & C813 100µ 50v, C812 1µ 50v cured high hT. C414 22µ 160v in LOP virtually o/c replacement cured dark pic & check C304 220µ 35v, C303 1000µ 35v near FOP chip |