Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
PANASONIC | TX-L42D25E | Não liga. LED verde a piscar | Soldas frias transformador da fonte | Pablo | |
RCA | L37WD22 L37WD250 L42WD22 L42WD250 L46WD22 L46WD250 | No analog channels, distorted or lost audio, digital channels still present. | On PCB Main Board, fuse 1C33 open. | Aaron | |
DELL | D250ED | Defeito. PC liga e desliga em seguida | Trocar regulador da fonte standby TNY280PN | Trocar TNY280PN e correr pro abraço | |
FONTE DELL | D250ED | PC liga e desliga em seguida | Trocar regulador do standby TNY280PN | ||
SONY | KV-D2511D AE1A | Não ligava. O led piscava consecutivamente. | R822 aberta. | Trocar R822 (1k/1W) | MAS |
LG | 14CD25 | sem sincronismo horizontal (imagem correndo de lado) | r512 4k7 precisao alterado com 4k9 | mega center | |
HP | D2525A | No power | R024=2.2m open | ||
Sony | KVD2512 | SOUND CUTS OUT OR IS DISTORTED | REPLACE C615 | ||
Sony | KVD2512 | Nicam int reverts to mono sound | Nicam buffer tr Q181 JC501 or 2SC2785 | ||
Sony | AE-1A KVD2512U | sound cuts out from cold, distorted when warm | C615 1000uF 25V | ||
Goodmans | GD2592 | Dead with blackened mains fuse | Chopper FETTr TP16 s/c, dry joints CP13 & DP51 BY399 HT rect s/c | ||
Goodmans | GD2580B TX92 | Installation menu entering | Sw TV to st/by then sw off at mains. Sw on TV whilst holding "P" button in on front until Lang menu appears | ||
Goodmans | GD2580 TX92 | Int dead | dry joints CP13 1nF5 1.6kv | ||
Goodmans | GD2580 TX92 | E/W settings different at sw on & int reverts to st/by | IF02 STV2145 | ||
Goodmans | GD2580 | Loud whistle | LL26 coil in line stage - hot melt glue used |