Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Grundig | CUC2058N | Não Arranca, o led brilha quando se carrega no P+ ou numa tecla do comando | Triplicador BG-1899-022-644 | ||
Grundig | MW82-2700 CUC2058 | Dead - pri volts only | R60002 (680K 1W) was O/C situated just behind the switch mode MOSFET on the primary side. | ||
Grundig | CUC2058 | St/by only | Tripler - cheaper from CPC | ||
Grundig | CUC2058 | No sound/pic - could be int | o/c print under small vert panel with 10 pins behind tuner | ||
Grundig | CUC2058 | No sound | Both audio o/p IC`s TDA7265 & 2.5A wickman fuse o/c | ||
Grundig | CUC2058 | Dead with blackened fuse | p. supply FET IRFPC50 was s/c due to 270k res in psu o/c, also replaced TDA4605-3 as a precaution | ||
Grundig | CUC2058 | Dead | TDA4605, 270k 1/2w res & chopper FET IRFPC50 (used 2SK2078 in lieu) - all in PSU |