Dicas Reparação




Modelo - Chassis CM


Pesquisa: CM Enviar Dica Resolvida
Resultados 1254
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
PhilcoPCM-2044
S/ alta tensão, led piscaIC401 (TDA2613)
PhilcoPC 1443,44, PCM 1444,2144++-CPH05
cor oscilando, imagem retorcendo como se estiver a sair da frequencia horizontal(C 205) 2,2 _50V
PhilcoPCM 1444 CPH-05
acionando a proteção.ZD903 com fuga e R714 alterado para 2K0.
SonyCMH333
NO POWER - RESOLDER U1 IN LOGIC BOARD The unit is dead. The unit will turn on if the logic PCB istwisted. I found the MPU IC U1 cold soldered.
SonyCMH333
UNIT KEEPS TURNING ON AND OFF - REPLACE Q2, P/N 8-729-021-54 Unit keeps turning on and off. Q2 current limiter transistoris shorted between collector and emitter.
SonyCMH333
POOR OR NO RECEPTION (CHECKS O.K. ON TESTER) Customer complains of poor or no reception. However unitchecks O.K. on cellular tester. It is due to poor antenna contact as whenthe unit is checked with cellular tester, the phone's antenna contact isout of the circuit and the external antenna terminal
SonyCMH333
NO AUDIO - GLUE RECEIVER LEAD TO COVER No audio on ear piece.
SonySSCM354
UNIT DEAD DC/DC CONVERTOR BAD- REPLACE Unit dead, dc/dc convertor bad. Serial number 16981 and11276 also included.
SonyCMH333
INTERMITTENT POWER Unit has no power. Squeeze bottom of unit, power comes on.
SonyDTCM100
DAMAGES TAPE - CLEANED STICKING GEAR REF 372 Unit eats tape when ejected. Found gear ref 372 sticky, movedslowly out. Causing damage to tape when ejected.
SonyCMH333
BAD KEYPAD When you press keys, don't always work.
SonyCMH20K
UNIT WOULD NOT REGISTER - REPLACE Y320, P/N 1-579-837-11 Unit would not register.
SonyCMP11K
UNIT WILL NOT COMPLETE WAKE UP CYCLE - REPLACE IC402 Unit would not wake up. All SVC level lights light up andwake up tone at very low audio level.
SonySSCM354
DC/DC CONVERTOR SHORTS BLOWING FUSE DC/DC convertor shorts, blowing fuse.
SonyDTCM100
DISPLAY MALFUNCTION - REPLACED DEFECTIVE D901 Display reacts to level meter and some portions of display arelit dim that should not be on at all.


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads