Dicas Reparação




Modelo - Chassis CCDV99


Pesquisa: CCDV99 Enviar Dica Resolvida
Resultados 29
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyCCDV99
NO PICTURE ON PAUSE When camera is in playback, put in pause, video will be lost(bad A head). Following the video path, found pin 20 HD-8 board hadone field missing when put in pause. Following it back, found that inpause, video switch between pin 5 and 3 IC-202 on the H
SonyCCDV99
VERTICAL LINES IN PICTURE Vertical, winding lines in picture, unstable raster.
SonyCCDV99
PART NUMBERS FOR FLEX CONNECTORS I need the part numbers for the following flex connectors:FP160, FP162, FP203.
SonyCCDV99
POOR AUDIO RECORD WITH LOUD POPS Records audio poorly with loud pops during camera recordings
SonyCCDV99
NOISY FF AND CUE Noisy FF and CUE. This is the second time I have seen this.
SonyCCDV99
ANGLE OF VIEW What are the wide and telephoto angles of view for the CCDV99?
SonyCCDV99
EXCESSIVE CURRENT DRAWN ON EJECT When the camera section is on and eject is pressed, thedisplay blinks on and off. If camera section is turned off, it is ok.Unit is connected to a power supply. -HQ COMMENTS: Try unit with a battery. This unit has a larger currentspike on eject than d
SonyCCDV99
PICTURE BLANKS BRIEFLY DURING INSERT EDIT When an insert edit is done through the composite video inputs(not HI8) onto a tape with HI8 recording, a problem occurs on playback onthe inserted portion. At the edit points there is a glitch where the pic-ture blanks quickly. The edit is not a clean
SonyCCDV99
UNIT CREASING TAPE This unit was creasing the tape.
SonyCCDV99
FOCUS HUNTING The focus did not lock. The unit kept hunting.
SonyCCDV99
RECORDING MOTOR NOISE Recording motor noise in audio even on wind cut position.
SonyCCDV99
TAPE JAM/NO EJECT Tape jam - no eject.
SonyCCDV99
NO POWER No power. Also pertains to serial number 238547.
SonyCCDV99
UNIT DOES NOT RECORD IN HI 8 THROUGH COMPOSITE VIDEO IN The unit will not record in Hi 8 through the composite videoinput. -HQ COMMENTS: This is normal operation for this unit.


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads