Dicas Reparação
Modelo - Chassis CCDV8AFU
Pesquisa: CCDV8AFU Enviar Dica Resolvida
Resultados 112
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CCDV8AFU | SCRAMBLED PIX | Intermittent scrambled pix. Could hear rattling in unitwhen moved. | ||
| Sony | CCDV8AFU | NO VIDEO RF | no video out on VHF-RF. | ||
| Sony | CCDV8AFU | EJECT LED AND NOISY MOTOR | When using AC adaptor, eject LED flashes. Motor noisy onbattery operation. | ||
| Sony | CCDV8AFU | NO RECORD | Flashing eject LED, will not stay in record mode. | ||
| Sony | CCDV8AFU | BAD PIX | Pix fuzzy on playback. Eats tapes. | ||
| Sony | CCDV8AFU | DISTORTED PIX | Picture distorted. | ||
| Sony | CCDV8AFU | NO VIEWFINDER FUNCTION | No playback thru viewfinder. | ||
| Sony | CCDV8AFU | LINES IN PIX | Lines in pix. | ||
| Sony | CCDV8AFU | NO AUDIO | No audio. | ||
| Sony | CCDV8AFU | P/N FOR MI-2 CABLE | Service manual shows no P/N for MI-2 cable (Pg 82 of S/M)which connects between the (AR-1) board (CN113) and (MA-13) board (CN406).Please inform P/N. -HQ COMMENTS: P/N is 1-935-008-13, but is not available from Tokyo. Asyou mentioned on the phone, you | ||
| Sony | CCDV8AFU | WILL NOT REWIND OR FF | Pinch press lever assy would not return to stop position afterbeing in playback mode. Found E clip holding pinch press lever assywas in contact with the assy. The E clip was not in contact with assyon a known good unit. | ||
| Sony | CCDV8AFU | NO VIDEO IN CAMERA MODE | In camera mode no video. Looked like no luminance sig, onlycolor. On ME-1 board had signal on TP703 and TP706, but on the outputof IC701 Pins 9 and 6 nothing was present. Flexing board would causeproblem to clear up. | ||
| Sony | CCDV8AFU | NO CAMERA VIDEO | No video sig. Faint outline could be seen, but it was allcolor with no luminance info. Found that I had signal to the input IC703of Pin 22 4H and Pin 16 4L-4H. Found no signal at Pin 18 which isthe input to 0.18 usec delay. Also found this pin at 0V. | ||
| Sony | CCDV8AFU | EXCESSIVE NOISE FROM DRUM BEARING | Noisy bearing on drum assembly causing excessive noisein PB and REC of video information. | ||
| Sony | CCDV8AFU | NO PLAYBACK/NO RECORD | Was unable to get unit to record, playback or erase. Checkedheads with SL-5151 head checker. All checked OK. Checked record andplayback amps, worked fine. |