Dicas Reparação
Modelo - Chassis CCDV8
Pesquisa: CCDV8 Enviar Dica Resolvida
Resultados 186
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CCDV8AFU | Q-810 ON HD6 BOARD DOESN'T FIT | Original part on HD-6 board (-12) is a different type ZK69,which is physically different from the 2SA1242LB. -HQ COMMENTS: Please cut the leads on the 2SA1242LB in order to makeit fit. Tokyo is considering replacing the 2SA1242LB with the originalZK69. | ||
| Sony | CCDV8AFU | WON'T EJECT TAPE | Won't eject or load Maxell P6-120. | ||
| Sony | CCDV8AFU | WHITE FLASHES | Intermittent iris mechanism. | ||
| Sony | CCDV8AFU | NO RF OUT | RF unit had video out but no audio out. | ||
| Sony | CCDV8AFU | PART NO FOR RING IN ZOOM LENS ASS'Y | Need part number for ring at front of zoom lens ass'y. -HQ COMMENTS: Because of the precise optical axis adjustment needed forthe zoom lens ass'y, the assembly is not done in Sony Factory soreplacement parts are unavailable. | ||
| Sony | CCDV8AFU | NO ATF | Unit would not lock up on playback. Traced problem to bufferQ106. Base of buffer had no DC. L106 connected to base, other side ofcoil had proper DC, found L106 open. On page 135 of Service Manual, thereis a mistake, diagram shows (2) L106. | ||
| Sony | CCDV8AFU | NO VIDEO OUTPUT (USING RFU80UC) | No video output (using RFU80UC). | ||
| Sony | CCDV8AFU | REPLACING CCD PICK-UP | This unit had intermittent picture. Found cold solder jointon CP-9 board. I have to remove CCD imager to repair unit. During removeor install one, seems damaged. | ||
| Sony | CCDV8 | NO PLAYBACK PAUSE | No PLAYBACK PAUSE, but RECORD PAUSE OK. When PAUSE is pushedduring PLAY, sound mutes but tape does not stop. Adjusting RV501 on SV-13board to minimum resistance allowed pause to work but pulse width out ofQ625/Q626 MMV was only 0.5ms instead of specifi | ||
| Sony | CCDV8AFU | IN VTR POWER ON, UNIT COMES ON IN RECORD PAUSE MODE | At turn on (VTR side) with the RF modulator plugged in, itwill come on in the record pause mode. If the RF modulator is left dis-connected, then it will come on in the normal stand by mode. There is aglitch in the power supply when this unit turns on, | ||
| Sony | CCDV8AFU | NO CHROMA | In camera mode - no chroma in video out, but luminance OK. | ||
| Sony | CCDV8AFU | BLACK/GREEN UPPER DRUM ASSY SUBS TO BLUE/RED | Computer subs A-7049-017-A (upper drum assy blk or grn) to-004-A (blue or red). Are these compatible? -HQ COMMENTS: Check the dynamic damper label for a 01A or 05A. If 01A,replace with rotary upper drum kit (A-7048-021-A). If 05A, replace withrotary | ||
| Sony | CCDV8AFU | TAPE JAM | Found brand new Maxell tape in machine would not eject. Unitsunable to load up. Load ring begins to bring tape around drum but hasinsufficient tape to complete cycle. -HQ COMMENTS: When there is insufficient leader tape threading ring willretract to u | ||
| Sony | CCDV8AFU | P/N FOR EF-2 BOARD CABLE | Needs P/N for cable (EV-1) attached to EF-2 board (see Page149, Ref. No. 128). -HQ COMMENTS: This cable is not available from Tokyo. Please remove onefrom a scrap unit or wire directly from EF-2 to ME-1 board. | ||
| Sony | CCDV8AFU | DARK CAMERA PICTURE | Dark camera picture when unit cold, after warm up unit played. |