Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | CCDF40 | INCORRECT PART NUMBER FOR IC201 | The 875232314 is subbed by 875232532 which is much larger. -HQ COMMENTS: The correct part number for IC201 is 875994488. | ||
Sony | CCDF40 | NO PLAYBACK | Scrambled picture. Looks like lost horz. sync. | ||
Sony | CCDF40 | INCORRECT PART NUMBER OF DT-71 BOARD | On page 147 of the CCD-F40 manual, the DT-71 board part numberis listed incorrectly. It is listed as A-7061-127-A. | ||
Sony | CCDF40 | ROLLING CHARACTERS IN VIEW FINDER | Vertical rolling characters in the view finder and inter-mittently on the E-E video. Check V ref. going into/coming from IC-366,and pin 13 of IC-367. If this signal is lost, the character will be dis-played on the monitor and will roll top to bottom. | ||
Sony | CCDF40 | REFERENCE NUMBER 310, PAGE 142 OF SERVICE MANUAL | Reference #311 and #312 not included with reference #310, asshown in service manual. Also, connector CN-192 not included on replace-ment board, and could find no part number in manual for CN-192. Partnumber 156653511 works. | ||
Sony | CCDF40 | 41 PIN FLEX CONNECTOR PART NUMBER | Need part number for the 41 pin flexible cable between the(SS-86) board and the (VA-40) board. -HQ COMMENTS: The part number is 1-626-229-11. | ||
Sony | CCDF40 | NO AUTO FOCUS/ZOOM | No autofocus/zoom. | ||
Sony | CCDF40 | ROLLING OF TIME AND DATE | Slow, intermittent roll, top to bottom of time and date. Noroll in picture. Roll is recorded on tape. | ||
Sony | CCDF40 | REPLACEMENT EVF NOT THE SAME AS SERVICE MANUAL | The replacement EVF is not the same as the one in the unit. -HQ COMMENTS: Please refer to CCD-F40 service manual - supplement No. 2. | ||
Sony | CCDF40 | NO SILL ADJUSTMENT | Service manual shows still adjustment pot RV-003. There is ahole in board for this adjustment but no adjustment pot is there. How doI adjust? -HQ COMMENTS: In playback pause, use edit search button on top ofcabinet to adjust for best pause. | ||
Sony | CCDF40 | WRONG PART NUMBER FOR DT-71 BOARD IN MANUAL | When servicer orders part number A-7061-127-A as in the manualfor the (DT-71) board, he receives an (AW-10P board). -HQ COMMENTS: Please change the service manual to the correct partnumber which is A-7068-127-A. | ||
Sony | CCDF40 | WILL NOT LOAD | Unit will not load. This is the third unit with this problem. | ||
Sony | CCDF40 | TO VIEW THE FRAME-BY-FRAME PLAYBACK PICTURE | Frame-by-frame playback not functioning. In operationalmanual and service manual instructions to view the frame-by-frame record-ing is incorrect. | ||
Sony | CCDF40 | NEED FOR EXTENSION CABLE WHEN SERVICING CAMERA | Servicer has requested that extension cables be made availablefor CN-007 on (SS-86) board. The cable on the camera is very short and itis difficult to operate the camera in the dis-assembled state for thepurposes of repair. Please advise if cable can b | ||
Sony | CCDF40 | RAGGEDY VERTICAL EDGES ON STRAIGHT OBJECTS (E.G. DOORS) | Edges of straight lines looked like line crawl especiallyabout 1/3 center of picture. |