Dicas Reparação




Modelo - Chassis C9


Pesquisa: C9 Enviar Dica Resolvida
Resultados 312
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
FergusonICC9
St/by onlyDP83 LL4148 o/c in 12v reg
FergusonICC9
St/by onlyTL64 BC585B s/c; TL65 BC327 o/c
FergusonICC9
Sound int or absentDry joints to skt BA05 rear of pcb
FergusonICC9
Sound int goes with micro lock upCheck/replace sm trs around micro - Tr85 BC848B, Tr87 BC858B, Tr90 BC848B & Tr81 (npn - wrongly marked on cct)
FergusonICC9
Sound full blast aft few minsTR55 BC848B sm o/c when heated
FergusonICC9
Sound cuts out when heated & no R/Cµ IR01 faulty
FergusonICC9
Sound absentTDA2030 cracked open but but replacement failed to cure; C514 1µ 50v in IF can faulty
FergusonICC9
Snow down both sides of a black box at sw onTr42 BC848B faulty (Txt out to main micro)
FergusonICC9
Shimmering picIP03 9V reg
FergusonICC9
Rolling may be int & only on video channel.Change res RV02 ( SMD ) to 1meg under Tx PCB.
FergusonICC9
Red LED flashes , HT OK, no line osc pin32 IV01TV06 has 10 volts on it's collector but is held off by pin 15 of IV01. IR02 EEPROM faulty (no data exchange - lines at 5v)
FergusonICC9
Poor pic - low emission 1 or 2 guns effectedRB24 red/RB44 green/RB64 blue 39k hi res on crt base
FergusonICC9
Poor LumaCheck TC02.03.or 04 - in this case - TX16 pnp sm tr leaky
FergusonICC9
perm or int blank raster even via scartreplace TX09 BC858B sm tr
FergusonICC9
No video o/p from scartTX04 BC858 sm s/c


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads