Dicas Reparação JVC




Modelo - Chassis C14ET1


Pesquisa: C14ET1 JVC Enviar Dica Resolvida
Resultados 42
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
JVCC14ET1
Sem côr, tem croma no pino 5 e não no 7 do IC AN5601KC306 0.01uF C/ FUGA (pino 5 do jungle)
Jvc C14ET1EK ONWA
Picture height is reduced to 2 inchesReplace C418. It's the coupling capacitor from the frame circuit to the scanning coils. It's value is 1000uF, 25V
JVCC14ET1K
No col & reduced height12v supply low R434 (6R8) hi res
JVCC14ET1EK Onwa
Rapid tripping at sw onC402 4n7 500v leaky in prot network
JVCC14ET1EK Onwa
Dead tho' st/by relay operatesSupply of 8.5v to IC301 pin 42 missing - R323 6k8 5w o/c
JVCC14ET1EK Onwa
Col goes aft 5 minsPin 12 IC301 AN5601K low at 2v (5.1v); C325 0.47mf 35v tant was fitted wrong way round
JVCC14ET1EK -Onwa
DeadC909 47µ had exploded & perlace C911 47µ 50v. No Ht when replaced - R404 1R0 safety res o/c in 16v supply
JVCC14ET1EK Onwa
Wriggling line at bottom of pic (after repairing blow up)12v line low at 11v - fusble res R434 0R68 had risen in value
JVCC14ET1EK Onwa
Sync crushing with soot & whitewash picC113
JVCC14ET1EK Onwa
Poor field syncC308
JVCC14ET1EK Onwa
Patterning & no colourCF101 in IF o/c
JVCC14ET1EK Onwa
No TxtC020 3µ3 50v o/c
JVCC14ET1EK Onwa
No sound with slight whistleC106
JVCC14ET1EK Onwa
No soundC110
JVCC14ET1EK Onwa
Int reverts to st/byLeaky tactile switches


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads