Dicas Reparação SANYO
Modelo - Chassis 80P
Pesquisa: 80P SANYO Enviar Dica Resolvida
Resultados 17
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sanyo | CTP7135 80P | Startup - takes a long time to startup. | C312 ( 10uf , 35v ) | ||
| Sanyo | CTP7132 80P | TRIPS SLOWLY | C312 10uF | ||
| Sanyo | CTP7132 80P | LINE OP TR SC | RESOLDER HEATSINK IF FAULT REOCCURS REPLACE D305 IN POWER SUPPLY AND POSSIBLY LOPT | ||
| Sanyo | CTP7132 80P | East west - fault R4012 burnt. | R4012 ( 2.2R ) Q4005 s/c , R4011 burnt , EW coil L4001 s/c. | ||
| Sanyo | CTP7132 80P | Dead with s/c LOP TR | Check connection to heatsink plate on main pcb & D305 zener in error detector cct - causing HT to rise | ||
| Sanyo | CTP7132 80P | Line OP transistor s/c. | RESOLDER HEATSINK IF FAULT REOCCURS REPLACE D305 IN POWER SUPPLY AND POSSIBLY LOPT | ||
| Sanyo | CTP6132 80P | Frame foldover at top. | C440 ( 4.7uf ) also change C447 ( 10uf ) | ||
| Sanyo | CTP6130 80P | Dead. | R302 ( 330k ) | ||
| Sanyo | CTP3106 80P | No colour. | C202 , C204. | ||
| Sanyo | CTP3106 80P | Dead. | No 300v at C308 , check L1001 , SW1001 , R301 , L302. | ||
| Sanyo | CTP3106 80P | Dead - 800Ma fuse blown. | Check Q304 , C315 , ( 1500pf ) , Q301/2/3 , D305/7. | ||
| Sanyo | CTP3106 80P | Dead - 2A fuse blown. | Check C1001 ( 100u f ) , D301 , C308 ( 100u f ) | ||
| Sanyo | 80P-B14 CTP3131 | Dead - chopper BUT11A Q304 s/c | R313 2R7 o/c - R302 390k o/c was the cause | ||
| Sanyo | 80P | ripple on verts & field foldover | C322 470µ 100v 45v res cap | ||
| Sanyo | 80P | Popping from speaker only - no sound/pic | LOPTx |