Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Grundig | CUC2800 | The tripler had failed. After replacing it the set | Microcontroller chip type SDA2011 -AOO5 . Make sure that you get the right one for the set. | ||
Grundig | CUC2800 | Sound low & dist | U2829B IC sound chip | ||
Grundig | CUC2800 | Sound from one chan only & no brill adj | Micro SDA2011-A005 faulty | ||
Grundig | CUC2800 | No sound | Check TDA6200 sound proc & U2829B sound dem chip | ||
Grundig | CUC2800 | Dead - psu working ok | Relay contacts | ||
Grundig | CUC2800 | Arcing from LOPTx former to adjacent components | Tripler faulty | ||
Grundig | CUC2080 | turns on but goes to SB after a second | TDA8350Q + R54012 1Ohm +R50011 33ohm. | ||
Grundig | CUC2080 | No power | IRFPC50 s/c and 270K (connected to pin 2 of TDA5605-3 | ||
Grundig | 80 | Smeary picture - intermittently. | Luma delay line leaky. |