Dicas Reparação
Modelo - Chassis 5100
Pesquisa: 5100 Enviar Dica Resolvida
Resultados 27
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| SONY | KV29F5100 | A imagem dobrada | Mm | Antônio Barbosa | |
| PHILIPS | 55PFG5100 | nao liga e led apagado | d9104 smd sk510 em curto | fazer a troca do mesmo e pronto | orlando lott |
| SAMSUNG | GT-P5100 | nao reconhece o chip | trocar slot do sim cad! | trocar slot sim card! visualmente dava para ver alguns contatos do slot do sim card quebrado. | rafael |
| GRUNDIG | GDP-3100-3200-5100 | Fonte não arranca | No espaço vazio da R204 adicionar uam resistência de 27R/2W; Se necessário ajustar RV201 até 3.4V | ||
| Toshiba | CT5100 | Patterning & slight hum bar | C807 120µ 400v | ||
| Proline | 5100RC | No pic - field coll noticed when A1 advanced, sound ok | Replace o/c 0R22 fusible resistor (R433) feeding the frame chip. The Frame output chip was O.K. | ||
| Finlux | 5100 | No sound/pic - EHT present | Blank raster when A1s advanced - no S5v or S12v supplies - Ta 18 BC557 leaky | ||
| Sony | KV5100 | REPLACEMENT FOR AC CORD DOES NOT FIT | Power cord replacment 1-551-298-00 does not fit. Originalpart number was 1-551-181-00. -HQ COMMENTS: Check with Tokyo and KCP. They have been using this cordfor the past four years with no trouble. Please order this part again. | ||
| Sony | KV5100 | INSUFFICIENT WIDTH | Insufficient width. Picture only in center 2/3 screen. | ||
| Sony | KV5100 | NEED'S PART # FOR BRACKET UHF TUNER | I need part number and availability of bracket for the UHFtuner. -HQ COMMENTS: The P/N for the UHF tuner bracket is 4-309-327-05, butit is not, and will not be available. | ||
| Sony | SL5100 | FRONT PANEL CLOCK / TIMER DOOR | I need part number for the door that covers clock/timersettings on front panel. -HQ COMMENTS: The part number is X-367-500-70. This information is alsocovered in T/N #8418. A fax has been sent to you. | ||
| Sony | KV5100 | PICTURE TUBE FAILURE | New picture tube installed, then unit went dead. Every timeconverter output transistor failed. Fail within a couple of hours.Servicer convinced problem not in power supply. Proved DC operation OK.Problem found to be dried out filtersand coupler capaci |