Dicas Reparação




Modelo - Chassis 5000


Pesquisa: 5000 Enviar Dica Resolvida
Resultados 253
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
PHILCOPVC-5000
Identifica fita sem terFlat cable branco
PHILCOPVC-5000
PHILCOPVC-5000
Não dispara o Drum e o CapstamIC602 e IC601
PHILCOPVC-5000
Drum e Capstam disparadosIC601
PHILCOPVC-5000
Inoperante...travadoC945
PHILCOPVC-5000
Desliga quando a fita caiIC905
PHILCOPVC-5000
PB normal, EE tela lavada com somTrocar trans da unidade FI por BC548
SonyEVS5000
NO INFO ON THE MODE SWITCH STATES... There is no info on the mode switch states. there is no way to know if the switch is operating properly. Is there any information anywhere on the switch? -HQ Comments: We received the info 7/8. A service bulletin is in
SonySPPA5000
HUM AND DISTORTION IN OGM - RESOLDER IC801 IN BASE Loud hum and static in OGM. Complaint confirmed.
SonyEVS5000
NO VIDEO OUT, BLUE SCREEN ONLY - REPLC LPF FL103(VI-131 BD) unit did not have any video outputs (E-E or playback). Traced signal to Low Pass Filter, FL103, on VI-131 board.
SonySPPA5000
NO DIAL TONE - REPLACE IC304 IN BASE, P/N 8-759-824-20 Won't get a dial tone.
SonySPPA5000
RX SINAD FAILING ON JIG ON MANY UNITS Found RX sinad failing on jig at 13.9 db on base unit on alot of units. Could these coils be misadjusted at the factory.
SonyEVS5000
CLOCK RUNS FAST (2 SEC PER DAY) - ADJUST TIMER CLOCK Clock runs fast about 2 sec per day. Found timer clock adjustment. Clock was running at 4096.11 hz spec calls for 4096-04 .01.
SonyEVS5000
LP PLAYBACK & RECORD PROBLEMS 3 units same customer 2 EVS5000, 1 EVS7000. EVS7000 recording has bad P/B. On both EVS5000 separate recording & P/B of each maching is fine. Checked all three 2/ tracking tape and all were ok.
SonySPPA5000
UNIT FLASHES E1 IN DISPLAY, NO OTHER FUNCTIONS At power up unit would sound an error beep and thenalternately flash e and 1 on the display. Pressing any button wouldresult in another error beep. If the page and stop keys were pressedduring power up the unit would go into test mode correctly. Un


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads