Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Toshiba | 2512DBT | Won't go into st/by | 2SC2032 (not 2SC2033) | ||
Toshiba | 2512DBT | Whistling , crackling , popping poor sound. | Redress scan coil , nicam signal leads. | ||
Toshiba | 2512DBT | St/by cannot be initiated | s/c tr in psu | ||
Toshiba | 2512DBT | Service mode access | Press the "F" button & video input button together on R/C. Enter "1048" R/C; "M" appears at the top right hand corner of screen. Hold "F" button & press picture menu button - Menu item up. Hold the "F" button and press the sound menu button - Menu item down Adjust using the volume "+" and "-" buttons - Go to standby to store and exit. | ||
Toshiba | 2512DBT | POOR NICAM WITH WHISTLE CRACKING/POPPING | REDRESS SCAN COIL LEADS AND DIGITAL DATA LEADS | ||
Toshiba | 2512DBT | Lack of height & wobbly outlines | Elects (esp brown ones) in hor driver module | ||
Toshiba | 2512DBT | Height reduced & E-W bowing | C372 2µ2 & C374 220µ in DPC module | ||
Toshiba | 2512DBT | Field - lack of height with bottom compressed | C372 2µ2 under screening can on DPC board |