Dicas Reparação
Modelo - Chassis 2195
Pesquisa: 2195 Enviar Dica Resolvida
Resultados 12
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Panasonic | TC2195DRS Z3T | SMPS noise. Low volt and high current on Usyst, no screen or sound | FBT TLF15606F | ||
| Panasonic | TC2195 Z3 | Dead but whines | R556 1A cct prot o/c, T531 line dr trfmr dry joints, LOPTr 2SD1439 leaky NOTE LOPTx may test faulty on LOPT tester but may not be - as I found out | ||
| Nikkai | TLG2195 | Tuning range limited | ZD101 33v zener faulty | ||
| Goodmans | 2195T CP330 | Field OP chip TDA3653B has short life (1 week) | C414 22µ pin 4 LOPTx leaky | ||
| Goodmans | 2195T | No OSD | No vert sync pulses to IV01 micro pin 38 - FOP chip TDA3653B faulty | ||
| Goodmans | 2195T | Field scan drastically reduced | IV04 33v reg | ||
| Goodmans | 2195T | Col running | C502/3 off pin 33 of chroma chip faulty | ||
| Goodmans | 2195 , 205N , 215N | NORMAL SETTINGS , AMBIGUITY IN USER INSTRUCTIONS , | STORE WITH STORE AND RETURN TO NORMAL BY PRESSING "MENU" TWICE. ---- USING "TV" TO EXIT DOES NOT WORK , THIS IS IN EFFECT | ||
| Goodmans | 2028T/2195T | LOCKED UP WITH NO CHANNEL CHANGE | REPLACE XT01 27MHZ CRYSTAL | ||
| Goodmans | 2028T/2195T | Chans locked | XT01 27Mhz Xtal | ||
| Goodmans | 2028T/2195T | Chans locked | XT01 27Mhz Xtal | ||
| Goodmans | 2195 | : Excess Width (after transformer replacement) | Change value of C411 from 0.33 to 0.47 |