Dicas Reparação TOSHIBA
Modelo - Chassis 2100TB
Pesquisa: 2100TB TOSHIBA Enviar Dica Resolvida
Resultados 8
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Toshiba | 2100TBT | RIPPLE ON PIC , WORSE WHEN WARM | CONNECT A 2.2mfd , 63v BETWEEN TUNERS VT PIN + CHASSIS FIT AS CLOSE AS POSS TO VT PIN | ||
| Toshiba | 2100TBT | just 2" lines at top of screen | C313 100µ 35v - flyback boost cap between pins 3 & 6 of AN5515 | ||
| Toshiba | 2100TBT | dead, fuse Ok | LOPTx AT2078/21 u/s, also check LOPTr | ||
| Toshiba | 2100TB | SEVERE PATTERNING PICTURE DISTORTION | R163 5k6 OC / HIGH IN IF CAN | ||
| Toshiba | 2100TB | Field - lack of height | C317 2µ2 | ||
| Toshiba | 2100TB | Field - excess height/poor lin | C303 2µ2 50v in field drive near pin 32 TA8659 | ||
| Toshiba | 2100TB | Excess height at sw on with poor lin | C303 2µ2 pin 32 IC501 | ||
| Toshiba | 1400TBT, 2100TB etc | Field cramp at bottom - stretched at top | C303 2µ2 |