Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
PHILCO | PCM1451 | Televisor nao sai do standby. | Capacitor de 1mF X 100v (C 913) da fonte. | Persio | |
PHILCO ITAUTEC | PCM1451 | TV LIGA COM EXCESSO DE ALTA TENSÃO E LOGO APÓS DESLIGA | RESISTOR 542 DE 15K ABERTO OU ADJACENTES | SUBSTITUA E NÃO ESQUEÇA DE MEDIR O R941 E O 943 | NIVALDO_TEC |
PHILCO | PCM- 1451 06 | Não liga led piscando | C 911 e C 913 com capacitancia baixa causando oscilação no secundário da fonte ou seja +B e B5 variando | trocar C911 e C 913 tv ok | George Pontes |
SEMP | TV1451 NAV U 18 | desliga apos 5 segundos e esquenta transistor de saida horizontal | trocado flybak defeito resolvido ,numero do flybak é tfb4203ag. | ||
PHILCO | PCM1451 | Sem gera e sem o +B. | TDA-4605-3 | Ramiro Lima | |
Philco | 1451 | gera e corta,e fica com o +b2 normal | defletora alterada | Ramiro Lima | |
TOSHIBA | TV1451 U18 | sem audio som roco | não é saida de audio e nem auto-falante | é só dessolda a base do Q611 o audio volta ok. | rnsousa |
TOSHIBA | TV1451 CHASSIS U18 | fonte não oscila | os +B todos baixos os comp da fonte todos ok, era uma trilha da plaquinha do eeprom partida. | ressoldei a trilha a eeprom liberouu a fonte. | rnsousa |
Sharp | C1451SC | Foldedover picture,reduced height and visible white line in te centre of screen. | Change C508 2,2uF/35V tantalum cap. Seemed to be O.K with a VOM. | ||
Sharp | C1451SC | Foldedover picture,reduced height and visible white line in te centre of screen. | Change C508 2,2uF/35V tantalum cap. Seemed to be O.K with a VOM. | ||
Sharp | C1451SC | Excessive horizontal width. | Check replace C613 cap. | ||
Sharp | C1451SC | Excessive horizontal width. | Check replace C613 cap. | ||
Sharp | C1451E | Flashing pic after warmed up | C619 10µ 100v | ||
NEI | NEI1451 | Int goes into st/by | RF coupling choke in base of LOPTr was int going o/c | ||
NEI | 1451TX | Won't tune - other buttons do strange things | Reprog EEPROM |