Dicas Reparação BEKO
Modelo - Chassis 14.2
Pesquisa: 14.2 BEKO Enviar Dica Resolvida
Resultados 63
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| BEKO | 14.2 14.2 | Linhas de retorno intermitente | Verificar/substituir R709 - 220R 1/4W | ||
| BEKO | 14.2 14.2 | Falta sincronismo | IC101 | ||
| BEKO | 14.2 14.2 | Distorção no som | Verificar C112 | ||
| BEKO | 14.2 14.2 | Led pisca Inoperativo | Alterar substituir C914 por 4,7uF/50V | ||
| BEKO | 14.2 14.2 | Mono, PIP versions are not available in the manual | Please see the soft copy on the web page | Mário Tavares | |
| BEKO | 14.2 14.2 | Replacing Termal Brand FBT with Eldor | Please apply TCN 2002/13 | Mário Tavares | |
| BEKO | 14.2 14.2 | Vertical defects :IC501 (TDA8359J) and R522 (Fuse Resistor) | Please apply TCN 2002/14 | Mário Tavares | |
| BEKO | 14.2 14.2 | Subwoofer sound is not good, sometimes distorted | Check 1nF on position C361 which is parallel to the speaker | Mário Tavares | |
| BEKO | 14.2 14.2 | Sound is distorted during start up | Check C350 capacitor | Mário Tavares | |
| BEKO | 14.2 14.2 | Spot on the CPT during shut off | Please check if C704 on CRT module is short circuited | Mário Tavares | |
| BEKO | 14.2 14.2 | Sound is distorted | Check and replace C112 | Mário Tavares | |
| BEKO | 14.2 14.2 | No horizontal sync | Check and replace IC101 | Mário Tavares | |
| BEKO | 14.2 14.2 | There is a bad noice at some channels | Check and replace IC101 | Mário Tavares | |
| BEKO | 14.2 14.2 | Some channels are absent | Replace R129 with 2.5Kohm potentiometer and change the value of C143 as 47N | Mário Tavares | |
| BEKO | 14.2 14.2 | Microprocessor spare parts codes in the service manual are not correct | Please see TCN's 2003/10, 2003/08 and 2002/17 | Mário Tavares |