Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
BASIC LINE | 11AK20S-E VESTEL 11AK20S-E | Não tinha abertura no horizontal. Uma risca com cerca de 2 cm na vertical. | R607 aquecia muito. Substituir o C606 e C605. | JManu | |
SEG | 11AK20M-6 11AK20M-6 | LIGA ,SEM MAT E SOM, TENSÕES DA FONTE CERTAS,LED FICA EM VERDE | CRISTAL X401 (503KHZ) NO IC401 (STV2116A) | joaquim cunha | |
VESTEL | 3731T Chassis 11AK20M-3 | Poucos segundos após ligar ouve-se ruído de motor de barco e aparecem 3 ou 4 linhas de retorno no topo do ecran | Trocar o Transformador de Linhas | ||
VESTEL | 3731 chassis 11AK20-3 | Dá som, não dá imagem | D602 | ||
TV Worten | Chassis 11AK20S | Liga-se, chia na área do transf. de linhas.O led, passa a verde, com pouca intensidade e a piscar. | Solda fria na área do horizontal (próximo ao transf. de linhas). | ||
SEG | 11AK20MS 37cm | Não obedece ao comando remoto | uP ST6387B1/F1A <=> ST6387 B1/FET | ||
Mitsai | 11AK20 | Morto, led não se ilumina | RP845-1M5 aberta | ||
Crown | CTV-8236, chassis Vestel 11AK20M-3 | Fica em Standby | Cristal X501, 8Mhz | ||
CROWN | ACTV 3698 Chassis 11AK20M-6 | Liga-se, tem as tensões todas normais em standby. Ao tentar armar volta logo p/ standby | Trocar C.I. de saída vertical | ||
Basic Line | BL1415Tx Chassi Vestel 11AK20M-6 | Tem tensões mas não tem MAT | Analizar e Mudar C-602 próx ao transistor saida de linhas | ||
BASIC LINE | BL 1415TX CHASSIS 11AK20M | fica tentando arrancar, led power sempre piscando | tsh BU508DF em curto | ||
Vestel | 3710 11AK20 | Switches to standby when hot | Check / replace C601 100nF and C605 3.3uF | ||
Bush | 1433 Vestel 11AK20SE-2 | Dead | Check / replace R809 0.47ohms. Could be the first indication of the chopper transforme going faulty | ||
Metz | 11AK20 | Switches to standby when hot | Check 4.00Mhz Xtal | ||
Watson | FA3629B 11AK20SE | Sound missing | R829 47R in TDA2822M IC301feed o/c & chip faulty |