Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Toshiba | 2527DB | Field cramp at bottom & lack of height | C322 2µ2 50v in ramp cct & C317 220µ 16v 12v decoupler | ||
Toshiba | 2527DB | DEAD , POWER AND TIMER LEDS FLASHING HT 40v AND VAR | Q828 2SC2230A-Y | ||
Toshiba | 2527DB | CRACKLE ON NICAM , FM. AND EXT SOURCES | ICG07 AUDIO PROCESSOR ( TA8776N ) BACK TERMINAL BOARD | ||
Toshiba | 2512DBT | Won't go into st/by | 2SC2032 (not 2SC2033) | ||
Toshiba | 2512DBT | Whistling , crackling , popping poor sound. | Redress scan coil , nicam signal leads. | ||
Toshiba | 2512DBT | St/by cannot be initiated | s/c tr in psu | ||
Toshiba | 2512DBT | Service mode access | Press the "F" button & video input button together on R/C. Enter "1048" R/C; "M" appears at the top right hand corner of screen. Hold "F" button & press picture menu button - Menu item up. Hold the "F" button and press the sound menu button - Menu item down Adjust using the volume "+" and "-" buttons - Go to standby to store and exit. | ||
Toshiba | 2512DBT | POOR NICAM WITH WHISTLE CRACKING/POPPING | REDRESS SCAN COIL LEADS AND DIGITAL DATA LEADS | ||
Toshiba | 2512DBT | Lack of height & wobbly outlines | Elects (esp brown ones) in hor driver module | ||
Toshiba | 2512DBT | Height reduced & E-W bowing | C372 2µ2 & C374 220µ in DPC module | ||
Toshiba | 2512DBT | Field - lack of height with bottom compressed | C372 2µ2 under screening can on DPC board | ||
Toshiba | 2512DB 2812DB C91SB | Poor width , corrugated effect on side of picture . | C424 4u7 PtNo24676479 | ||
Toshiba | 2512DB | WONT GO TO SBY | Q845 ( 2SC2033 - Toshiba 23314246 ) | ||
Toshiba | 2512DB | STUCK IN STBY IF PIN 64 ICA01 OK AT 5v CHECK PIN 3 | REPLACE IC805 Pt No23318232 | ||
Toshiba | 2512DB | STATIC DISCHARGE FROM SPEAKER GRILLS | USE STATKIT TO DIRECTLY CONNECT GRILLS TO CHASSIS ( SUPERCEDES JULY BULLETIN RE FITTING NEW CABINET ) |