Dicas Reparação GRUNDIG




Modelo - Chassis


Pesquisa: GRUNDIG Enviar Dica Resolvida
Resultados 797
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
GrundigCUC2410
No sound - may have had a flash over.IC TDA2595
GrundigCUC2410
NO SOUNDTDA2595 MUTING SET
GrundigCUC2410
no pic, sound & txt ok blank rasterno vid i/p at pin 8 TDA3566 - BC 548C Tr2523 s/c c-e
GrundigCUC2410
dead - spillageReplace 1.25 & 2.5A fuses, chopper tr BU508A. Now works but R616 2k7 start up res overheats - R617 thermistor u/s. Code 07902 - WVE
GrundigCUC2410
AGC fault - dist pic on good signalVideo discriminator coil on IF F2211
GrundigCUC2401
Trips at sw onL519 shorted turns
GrundigCUC2401
Tripping - at switch on.R637 1k control.
GrundigCUC2401
Tripping - at switch on - may come on.C661 ( 7u f , 25v )
GrundigCUC2401
Switching to standby - my take days.Tripler.
GrundigCUC2401
Startup - failure to start intermittent.Set HT R637 ( 1k ) may ch Ok , LOPTX if going off af few mins
GrundigCUC2401
Standby - intermittent shut down.Set HT control R637 ( 1k ) may check Ok.
GrundigCUC2401
Sound - mutes on video rec playback.Mod ABL module.
GrundigCUC2401
SET GOES TO STBY VERY INTTRIPLER US
GrundigCUC2401
No sound or - Picture - intermittent.Suspect the set-EHT control ( especially if made by Preh.
GrundigCUC2401
No soundCould be TDA2595, TDA130 or SDA2011-A003 micro


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads