Dicas Reparação
Modelo - Chassis
Pesquisa: Enviar Dica Resolvida
Resultados 81365
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CDP30 | DISC WILL NOT SPIN | Disc won't spin due to resting on table assembly. Servicerhad 2 units with same problem. Found in both cases that 2 of the 3supports for M703 spindle motor assy were broken off. | ||
| Sony | CDP70 | NO PLAY | No play, disc spins backward briefly. Found no 35 MHz. Thisis second unit in one month with same problem. | ||
| Sony | RT44 | NEED DIAGRAM OF BIAS OSC AREA | I need diagram of bias osc. area on the power amp board. -HQ COMMENTS: The schematic diagram for the area of ckt is in theservice manual on Page 31. | ||
| Sony | KV1976R | CB TVI, SEE SB CTV0288R | Customer experiences CB TVI through speakers, even with setturned off, but with master power on. Same problem with power on, alsogets noise in picture. Customer is a CB operator himself and seemsfamiliar with noise reduction techniques. TVI appears to | ||
| Sony | CDP302 | SKIPPING THE TRACK SPECIALLY ON TELARC DISC | This disc has 20 track music. From 18 to 20, it skips usuallyfirst part of music, like from 0.00 jump immediately to 0.18 and so on. | ||
| Sony | ESR10 | POPPING NOISE AT LOW VOLUME ON TAPE | At low volume there is a popping noise when playing back tape.Appears to be spark plug related. Happens only when in Ford Products. | ||
| Sony | CDP102 | NOISE IN AUDIO AFTER WARMING UP | Noise in the audio after the unit has been playing for 15-20min. | ||
| Sony | KV1956R | INTERMITTENT NO UHF, LEAKY CAPACITOR NOT SHOWN IN S/M | This unit would intermittently shift from UHF channels tocable channels causing no normal UHF ch. reception. | ||
| Sony | STRV45 | NO AUDIO OUTPUT | No audio output. Had audio to relay but relay was notengaging. | ||
| Sony | XR65 | DISTORTED SOUND | Distortion in audio when listening to radio (FM) and systemEQ switch was turned on, but system EQ did not distort on tape. But iflistening to tape and Dolby was turned on, unit had several distortion. | ||
| Sony | KV2680R | AUDIO NOISE ON RIGHT CHANNEL WITH CABLE, POOR CABLE SIGNAL | My last visit to Cathedral City I was shown a KV-2680R. Whenon SAP or both, the right channel was very noisy. I visited anotherdealer and found this to be the same on another KV-2680R. The area is oncable which is very bad. But the problem is this mo | ||
| Sony | SLHF900 | RAINBOW IN EDITS | Rainbow or beat noise in video when in video insert functiononly. Upon inspection found erase head not being turned on in thisfunction. -HQ COMMENTS: This is normal in the SL-HF900. A strong and constantsignal such as color bars from a signal generato | ||
| Sony | CDP302 | FROZEN CLV MOTOR SHAFT | CLV motor would not turn, even though it was getting drive. | ||
| Sony | KV2670R | LOSS OF -33V RESULTING NO CHANNEL DEL/ADD, REPLACE L-105 | Could not erase or add a channel. All channels had to besequenced thru in numerial order. Found no neg -24V or -10V on Pins 6and 7 of IC105 (memory) only when set was on. The -33V supply source waspresent when set was off. | ||
| Sony | TCV7 | NO AMS FUNCTION | When trying to put the unit into AMS function, the headchassis did not stay in the AMS position. It came down to the stop posi-tion and went into FWD or RVS mode. |