Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | SLV393 | INTERMITTENT BLUE SCREEN | Intermittent blue screen. | ||
Sony | KV27TS35 | WHEN TURNED OFF PIX, SOUND GO OUT BUT B+ REMAINS, Q-613 | Al Sarhad reports from retirement: At turn off eitherby remote or manually picture and sound goes out but High Voltage and B+line was active. You could get a display on the scren using the remote. | ||
Sony | KV27EXR10 | INTERMITTENT SHUT DOWN, REPLACED Q-603 (G BOARD) | Intermittent shut down. sometimes it would stay on just a fewminutes. The 135V line never changed and the load never changes. | ||
Sony | CCDTR101 | PICTURE JUMPY WHEN STEADY SHOT IS USED | Picture jumpy when steady shot is switched on. | ||
Sony | CMH1K | NO POWER UP | Will not power up when you hit power button. | ||
Sony | KPR46XBR15 | POOR REGISTRATION, RE-ADJUSTED | Home technician in Costa Mesa informed me of customerscomplaining about convergence. Technician tells me it is not the bluedefocusing problem. It is just poor convergence coming out of the plant.He tells me he has had two or three complaints of this na | ||
Sony | CDXR79 | AM SEEKS IN 9KHZ STEPS | AM seeks in 9kHz steps. Is there a combination of buttons todepress to convert to 10kHz USA mode as on some other models? | ||
Sony | EVS550 | NOISE IN VIDEO IN E/E MODE | Noise in the video when in E/E mode. Capacitor C-005 wasmissing in the unit. Technician added the capacitor which resolved theproblem. This unit worked before the capacitor was added. Being the unitis two years old, technician could not find anything | ||
Sony | ITA505 | WILL NOT ANSWER INCOMING CALLS | |||
Sony | ITA305 | WILL NOT ANSWER INCOMING CALLS | |||
Sony | ITA205 | WILL NOT ANSWER INCOMING CALLS | |||
Sony | TAM50 | WILL NOT ANSWER INCOMING CALLS | |||
Sony | TAM30 | WILL NOT ANSWER INCOMING CALLS | |||
Sony | ITD200 | UNIT WON'T HANG UP | Unit would not go On Hook. The keyboard, handset,speakerphone otherwise operated normally. | ||
Sony | SPP95 | NO VOLUME CONTROL | Found unit not able to change the volume of the handsetspeaker. Checked pin 3 of IC-701 (Volume Pin) was always low. CheckedR-720 and found it missing. R-720 supplies the high for IC-701/pin 3. |